Esp32 keyboard

tigmit·TIGMIT-NEKO-BOARD·kiCad/esp32_Keyboard/esp32_Keyboard.kicad_pcb

Esp32 keyboard PCB layout, top view — open source ESP32 board by tigmit

About the Esp32 keyboard PCB

Esp32 keyboard is an open source ESP32 PCB design by tigmit, published on GitHub. It is a 2-layer board measuring 344.5 × 125.4 mm, with 179 components from 14 distinct parts.

Its main chip is the ESP32-DEVKIT-V1 Matrix Handler, from the ESP32 family. Other key parts include the SN74HC595NG4 FirstShift, SN74HC595NG4 SecondShift and BOB-12009. By type, the board carries 83 switches, 79 diodes, 7 resistors, 5 ICs and 2 capacitors.

It belongs with the keyboards and iot & wireless designs in this gallery.

From the project

a diy keyboard

HEY fellow nerd :3 thanks for checking out my project hehe

This is a one man project trying to create (my) ultimate keyboard. taylored to the personal needs of a software developer with a thing for cute and weeby shit... hence the name :P

- 79 keys in a kind of.. compact TKL arrangement. - a 240 x 240 round Display - rotary encoder - analog slider - fully controllable RGB for each key - hot swappable switches - fully custom Firmware (feel free to reuse for your project) - wireless operation via Bluetooth - a fully functioal shell with ato completion

Esp32 keyboard, from the project README
From the project README

Main components on the Esp32 keyboard

SN74HC595NG4 FirstShiftSN74HC595NG4 SecondShiftBOB-12009ESP32-DEVKIT-V1 Matrix Handler

Esp32 keyboard bill of materials (BOM)

179 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SN74HC595NG4 FirstShift
U1
1
SN74HC595NG4 SecondShift
U2
1
BOB-12009
U3
1
~
U4
1
ESP32-DEVKIT-V1 Matrix Handler
U5
1
~
Dsp1
1
Conn_01x04_Pin
PWR_Module1
1
CONN_01X05_PIN
Conn_01x05_Pin
RotaryEnc1
3
stab 2u
S1, S2, S3
1
stab space 6.25u
S4
79
~
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +71
79
Diode
D1, D2, D3, D4, D5, D6, D7, D8 +71
2
100µF
C1, C2
7
10K
R1, R2, R3, R4, R5, R6, R7

Esp32 keyboard design files

The KiCad project lives in the tigmit/TIGMIT-NEKO-BOARD repository on GitHub; these links point at the commit this page was built from.

Esp32 keyboard: common questions

What microcontroller does the Esp32 keyboard use?

The Esp32 keyboard is built around the ESP32-DEVKIT-V1 Matrix Handler, from the ESP32 family.

How big is the Esp32 keyboard PCB?

The Esp32 keyboard measures 344.5 × 125.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp32 keyboard?

179 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp32 keyboard design files?

From the tigmit/TIGMIT-NEKO-BOARD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Esp32 keyboard design in my own project?

The repository has no license, so all rights stay with tigmit. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Esp32 keyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in TIGMIT-NEKO-BOARD

Similar boards