Filter Amplifier
TIH-engineering·Filter_Amplifier·pcb/Filter_Amplifier.kicad_pcb
About the Filter Amplifier PCB
Filter Amplifier is an open source PCB design by TIH-engineering, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 60 × 40 mm, with 32 components from 10 distinct parts.
Other key parts include the LM358. By type, the board carries 13 connectors, 9 capacitors, 9 resistors and 1 IC.
It belongs with the audio designs in this gallery.
From the project
Filters and amplifiers
Die Leiterplatte FilterAmplifier dient zur praktischen Untersuchung von aktiven Filtern und Operationsverstärkerschaltungen**. Sie wurde insbesondere für Laborübungen im Bereich Elektronik und Messtechnik entwickelt.
Die Schaltung besteht aus zwei hintereinander geschalteten Operationsverstärkerstufen mit einem LM358. Durch unterschiedliche Jumperstellungen können verschiedene Schaltungsvarianten realisiert und messtechnisch untersucht werden.
Main components on the Filter Amplifier
Filter Amplifier bill of materials (BOM)
32 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM358 | DIP-8_W7.62mm | U1 |
| 2 | Conn_Coaxial | BNC_TEConnectivity_1478204_Vertical | J1, J19 |
| 3 | Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J2, J3, J4 |
| 6 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J5, J6, J10, J12, J13, J17 |
| 2 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J11, J18 |
| 5 | 100n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C7, C8 |
| 4 | 10n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C5, C6, C9 |
| 1 | 100k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 6 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3, R4, R8, R9, R11 |
| 2 | 10k | R_axial_SMD-Adapter_P10.16mm_1mm | R5, R10 |
Filter Amplifier design files
The KiCad project lives in the TIH-engineering/Filter_Amplifier repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/Filter_Amplifier.kicad_pcb
- Schematicpcb/Filter_Amplifier.kicad_sch
Filter Amplifier: common questions
How big is the Filter Amplifier PCB?
The Filter Amplifier measures 60 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Filter Amplifier?
32 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Filter Amplifier design files?
From the TIH-engineering/Filter_Amplifier repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Filter Amplifier design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687