TKNBRD by TKN

tikinson·tknbrd0

TKNBRD by TKN PCB layout, top view — open source RP2040/RP2350 board by tikinson

About the TKNBRD by TKN PCB

TKNBRD by TKN is an open source RP2040/RP2350 PCB design by tikinson, published on GitHub. It is a 2-layer board measuring 304.2 × 135.5 mm, with 129 components from 6 distinct parts.

Its main chip is the Raspberry_Pi_Pico, from the RP2040/RP2350 family. By type, the board carries 42 switches, 42 diodes, 1 IC and 1 connector.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

my first custom mechanical keyboard

After a couple of sleepless nights, I decided to get my hands dirty with this sweet and diverse world of mechanical keyboards. As i understood on my way to my current daily driver it's quite interesting challenge. My main idea was to make a cheap keyboard, that can guide me forward in this hobby.

So, i made a rough sketch of the location of my fingers to understand how far i must go with ergogen and then use spacing of switches in KiCad to make a PCB. Also this isn't a bad idea to play around with encoders and small OLED display in my project. As it usually almost everytime happens with…

TKNBRD by TKN, from the project README
From the project README

Main components on the TKNBRD by TKN

TKNBRD by TKN bill of materials (BOM)

129 components, 6 distinct parts.

QtyPartRefs
1
Raspberry_Pi_Pico
U1
1
Conn_01x04
J1
42
Keyswitch
S1, S2, S3, S4, S5, S6, S7, S8 +34
1
1N4148WT
rD1
42
YS-SK6812MINI-E
rLED1, rLED2, rLED3, rLED4, rLED5, rLED6, rLED7, rLED8 +34
42
Diode
D1, D2, D3, D4, D5, D6, D7, D8 +34

TKNBRD by TKN design files

The KiCad project lives in the tikinson/tknbrd0 repository on GitHub; these links point at the commit this page was built from.

TKNBRD by TKN: common questions

What microcontroller does the TKNBRD by TKN use?

The TKNBRD by TKN is built around the Raspberry_Pi_Pico, from the RP2040/RP2350 family.

How big is the TKNBRD by TKN PCB?

The TKNBRD by TKN measures 304.2 × 135.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TKNBRD by TKN?

129 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the TKNBRD by TKN design files?

From the tikinson/tknbrd0 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the TKNBRD by TKN design in my own project?

The repository has no license, so all rights stay with tikinson. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TKNBRD by TKN without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards