IKEA Vindriktning Daughterboard Schematic and PCB-
TimWoodburn·IKEA_Vindriktning_Daughterboard_Schematic_and_PCB-
About the IKEA Vindriktning Daughterboard Schematic and PCB-
IKEA Vindriktning Daughterboard Schematic and PCB- is an open source ESP8266 PCB design by TimWoodburn, published on GitHub. It is a 2-layer board measuring 42 × 36 mm, with 22 components from 12 distinct parts.
Its main chip is the ESP-12F, from the ESP8266 family. Other key parts include the AP2202-3V3. By type, the board carries 11 resistors, 5 capacitors, 4 connectors and 2 ICs.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
This project is an adoptation based on Lond's Hackaday.io project, https://hackaday.io/project/181195-ikea-vindriktning-pcb and a fork of Catalin Sanda who provided their schematics, https://hackaday.io/project/184282-ikea-vindriktning-daughterboard
This project is an adoptation based on Lond's Hackaday.io project, https://hackaday.io/project/181195-ikea-vindriktning-pcb and Catalin Sanda who provided their schematics, https://hackaday.io/project/184282-ikea-vindriktning-daughterboard
Blakadder has a nice write up. The Tasmota setup is applicable to this project https://blakadder.com/vindriktning-tasmota/
Main components on the IKEA Vindriktning Daughterboard Schematic and PCB-
IKEA Vindriktning Daughterboard Schematic and PCB- bill of materials (BOM)
22 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP-12F | ESP-12E | U1 |
| 1 | AP2202-3V3 | SOT-23-5 | U2 |
| 1 | FTDI Connector | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | CONN_01X03_MALE Conn_01x03_Male | Molex_PicoBlade_53398-0371_1x03-1MP_P1.25mm_Vertical | J2 |
| 1 | CJMCU-680 | Molex_PicoBlade_53398-0671_1x06-1MP_P1.25mm_Vertical | J3 |
| 1 | CONN_01X02_MALE Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 3 | 330NF 330nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C5 |
| 1 | C1848 1.0µF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 1.0UF 1.0uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 9 | 10K | R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
| 1 | 220K | R_0805_2012Metric | R9 |
| 1 | 100K | R_0805_2012Metric | R10 |
IKEA Vindriktning Daughterboard Schematic and PCB- design files
The KiCad project lives in the TimWoodburn/IKEA_Vindriktning_Daughterboard_Schematic_and_PCB- repository on GitHub; these links point at the commit this page was built from.
IKEA Vindriktning Daughterboard Schematic and PCB-: common questions
What microcontroller does the IKEA Vindriktning Daughterboard Schematic and PCB- use?
The IKEA Vindriktning Daughterboard Schematic and PCB- is built around the ESP-12F, from the ESP8266 family.
How big is the IKEA Vindriktning Daughterboard Schematic and PCB-?
The IKEA Vindriktning Daughterboard Schematic and PCB- measures 42 × 36 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IKEA Vindriktning Daughterboard Schematic and PCB-?
22 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IKEA Vindriktning Daughterboard Schematic and PCB- design files?
From the TimWoodburn/IKEA_Vindriktning_Daughterboard_Schematic_and_PCB- repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IKEA Vindriktning Daughterboard Schematic and PCB- design in my own project?
The repository has no license, so all rights stay with TimWoodburn. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the IKEA Vindriktning Daughterboard Schematic and PCB- without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398