HackGrid

Tinkering-Townsperson·HackGrid·PCB/HackGrid.kicad_pcb

HackGrid PCB layout, top view — open source RP2040/RP2350 board by Tinkering-Townsperson

About the HackGrid PCB

HackGrid is an open source RP2040/RP2350 PCB design by Tinkering-Townsperson, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 91 × 91 mm, with 26 components from 5 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 12 switches, 12 diodes, 1 IC and 1 connector.

It belongs with the keyboards, audio and displays & leds designs in this gallery.

From the project

The HackGrid is a custom keyboard that uses the MIDI protocol.

The HackGrid is a custom keyboard that uses the MIDI protocol instead of HID. This means that instead of typing letters, you can use it to control audio softwares, such as software synths or DAWs.

- MIDI Compatibility - Easy configuration with settings.toml - OLED screen with lots of information!

This is the Schematic and PCB made in KiCad.

The case was designed in Autosdesk Fusion.

HackGrid, from the project README
From the project README

Main components on the HackGrid

HackGrid bill of materials (BOM)

26 components, 5 distinct parts.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
1
Conn_01x04_Pin
J1
11
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +3
1
RotaryEncoder_Switch
SW12
12
D_Small
D1, D2, D3, D4, D5, D6, D7, D8 +4

HackGrid design files

The KiCad project lives in the Tinkering-Townsperson/HackGrid repository on GitHub; these links point at the commit this page was built from.

HackGrid: common questions

What microcontroller does the HackGrid use?

The HackGrid is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the HackGrid PCB?

The HackGrid measures 91 × 91 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HackGrid?

26 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the HackGrid design files?

From the Tinkering-Townsperson/HackGrid repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the HackGrid design in my own project?

Yes, under the terms of its GPL-3.0 license, which Tinkering-Townsperson chose for the repository.

Can I test firmware for the HackGrid without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards