Splittyboi

Tirthak-bot·Splittyboi·PCB/Split Keyboard.kicad_pcb

Splittyboi PCB layout, top view — open source Nordic nRF board by Tirthak-bot

About the Splittyboi PCB

Splittyboi is an open source Nordic nRF PCB design by Tirthak-bot, published on GitHub. It is a 2-layer board measuring 294.2 × 115 mm, with 123 components from 4 distinct parts.

Its main chip is the XIAO-nRF52840-SMD, from the Nordic nRF family. By type, the board carries 60 switches, 60 diodes and 2 ICs.

It belongs with the keyboards, iot & wireless and power & battery designs in this gallery.

From the project

A split keyboard with low profile switches , coded with KMK Firmware.

Making this because i want to try a split keeb :3

Using this is pretty straight forward obviously blehh, just connect it to the computer, flash the firmware once and it should just work like a regular keeb moving forward :)

You just drop the pcb in place :) and for the both halfs of the case, they join using magnets!

The magnets are glue and drop, not press fit! So the thin walls around the magnet holes won't cause any problems!

Splittyboi, from the project README
From the project README

Main components on the Splittyboi

Splittyboi bill of materials (BOM)

123 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
XIAO-nRF52840-SMD
U1, U2
60
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +52
1
VAL**
mouse-bite-5mm-slot
60
D
D1, D2, D3, D4, D5, D6, D7, D8 +52

Splittyboi design files

The KiCad project lives in the Tirthak-bot/Splittyboi repository on GitHub; these links point at the commit this page was built from.

Splittyboi: common questions

What microcontroller does the Splittyboi use?

The Splittyboi is built around the XIAO-nRF52840-SMD, from the Nordic nRF family.

How big is the Splittyboi PCB?

The Splittyboi measures 294.2 × 115 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Splittyboi?

123 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Splittyboi design files?

From the Tirthak-bot/Splittyboi repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Splittyboi design in my own project?

The repository has no license, so all rights stay with Tirthak-bot. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Splittyboi without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

Similar boards