Gsa d1-v
tjb803·gsa-diamond1·v-pwr/gsa-d1-v.kicad_pcb
About the Gsa d1-v PCB
Gsa d1-v is an open source PCB design by tjb803, published on GitHub under the MIT license. It is a 2-layer board measuring 73.7 × 49.5 mm, with 20 components from 9 distinct parts.
By type, the board carries 7 connectors, 4 diodes, 2 capacitors and 2 resistors.
It belongs with the audio designs in this gallery.
From the project
Simple Stereo Hi-Fi Amplifier
This is a simple Hi-Fi Stereo amplifier project. The intention of the project is to produce something that is simple for anyone to build without special tools, yet can both sound good and look good.
Please take a look at the project pages [link TBD] for more details and pictures of completed examples.
The project is based around the Texas Instruments LM1876 single chip amplifier with a pre-amp section providing a volume and balance control and push-button selection of up to four input sources and standby mode.
Gsa d1-v bill of materials (BOM)
20 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN-4 | SCREW4 | J501 |
| 3 | CONN-3 | SCREW3 | J502, J504, J505 |
| 2 | CONN-2 | SCREW2 | J503, J506 |
| 1 | CONN-3 | MOLEX3 | J507 |
| 1 | BRIDGE | BR-SIL | BR501 |
| 4 | HOLE | HOLE33 | H501, H502, H503, H504 |
| 4 | DIODE | RECT5 | D501, D502, D503, D504 |
| 2 | 4700u | ELEC22R | C501, C502 |
| 2 | 2.7k | RES10 | R501, R502 |
Gsa d1-v design files
The KiCad project lives in the tjb803/gsa-diamond1 repository on GitHub; these links point at the commit this page was built from.
- Layoutv-pwr/gsa-d1-v.kicad_pcb
Gsa d1-v: common questions
How big is the Gsa d1-v PCB?
The Gsa d1-v measures 73.7 × 49.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Gsa d1-v?
20 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Gsa d1-v design files?
From the tjb803/gsa-diamond1 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Gsa d1-v design in my own project?
Yes, under the terms of its MIT license, which tjb803 chose for the repository.
More boards in gsa-diamond1
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687