Gsa d1
tjb803·gsa-diamond1
About the Gsa d1 PCB
Gsa d1 is an open source PCB design by tjb803, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 100 mm, with 94 components from 40 distinct parts.
Other key parts include the 4093, 4017, 4066, 7905 and 7805. By type, the board carries 22 capacitors, 21 resistors, 15 connectors, 7 ICs, 7 diodes and 5 transistors.
It belongs with the audio designs in this gallery.
From the project
Simple Stereo Hi-Fi Amplifier
This is a simple Hi-Fi Stereo amplifier project. The intention of the project is to produce something that is simple for anyone to build without special tools, yet can both sound good and look good.
Please take a look at the project pages [link TBD] for more details and pictures of completed examples.
The project is based around the Texas Instruments LM1876 single chip amplifier with a pre-amp section providing a volume and balance control and push-button selection of up to four input sources and standby mode.
Main components on the Gsa d1
Gsa d1 bill of materials (BOM)
94 components, 40 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4093 | DIL14 | U201 |
| 1 | 4017 | DIL16 | U202 |
| 2 | 4066 | DIL14 | U301, U302 |
| 1 | 7905 | REG79 | U303 |
| 1 | 7805 | REG78 | U304 |
| 1 | LM1876 | TO220-15 | U401 |
| 5 | 2N7000 | TO92F-SGD | Q201, Q202, Q203, Q204, Q205 |
| 4 | CONN-2 | MOLEX2 | J201, J203, J307, J402 |
| 2 | CONN-4 | MOLEX4 | J202, J301 |
| 7 | CONN-3 | MOLEX3 | J302, J303, J304, J305, J306, J308, J403 |
| 1 | CONN-3 | SCREW3 | J401 |
| 1 | CONN-2 | SCREW2 | J404 |
| 6 | HOLE | HOLE33 | H201, H202, H301, H302, H401, H402 |
| 2 | PAD | PAD07 | JP301, JP302 |
| 2 | LINK | LINK2 | JP303, JP304 |
| 5 | SW-PUSH | SW-TACT-ALL | SW201, SW202, SW203, SW204, SW205 |
| 1 | 22k | POT-OMEG | VR301 |
| 1 | 100k | POT-DUAL | VR302 |
| 5 | LED | LED3 | D201, D202, D203, D204, D205 |
| 2 | 1N4001 | DIODE10 | D301, D302 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 100n | CAP725 | C201, C301, C304, C305, C408, C409 |
| 1 | 1n | CAP-C25 | C202 |
| 1 | 10u | ELEC4R | C203 |
| 2 | 22u | ELEC5R | C302, C303 |
| 2 | 2.2u | CAP740 | C401, C402 |
| 2 | 220p | CAP-C25 | C403, C404 |
| 2 | 47u | ELEC5R | C405, C406 |
| 2 | 100u | ELEC6R | C407, C410 |
| 2 | 100n | CAP-7-10 | C411, C412 |
| 2 | 47u | ELEC4R | C413, C414 |
| 1 | 100k | RES10 | R201 |
| 3 | 10k | RES10 | R202, R203, R413 |
| 1 | 560R | RES10 | R204 |
| 2 | 4.7k | RES10 | R301, R302 |
| 1 | 5R6 | RES10 | R401 |
| 2 | 47k | RES10 | R402, R405 |
| 6 | 1k | RES10 | R403, R404, R406, R407, R408, R410 |
| 2 | 39k | RES10 | R409, R411 |
| 2 | 4R7 | RES12 | R412, R415 |
| 1 | 18k | RES10 | R414 |
Gsa d1 design files
The KiCad project lives in the tjb803/gsa-diamond1 repository on GitHub; these links point at the commit this page was built from.
- Layoutgsa-d1.kicad_pcb
Gsa d1: common questions
How big is the Gsa d1 PCB?
The Gsa d1 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Gsa d1?
94 components, from 40 distinct parts. The full bill of materials is listed on this page.
Where can I download the Gsa d1 design files?
From the tjb803/gsa-diamond1 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Gsa d1 design in my own project?
Yes, under the terms of its MIT license, which tjb803 chose for the repository.
More boards in gsa-diamond1
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687