Mechatronics-Roadmap

TLE47·Mechatronics-Roadmap·08-capstone-projects/eda-capstone1-foc-drive/capstone1_foc_48v30a.net

This repository ships a schematic but no board layout.

About the Mechatronics-Roadmap PCB

Mechatronics-Roadmap is an open source STM32 PCB design by TLE47, published on GitHub under the CC-BY-4.0 license. It is a board, with 24 components from 11 distinct parts.

Its main chip is the STM32G474RET6, from the STM32 family. Other key parts include the DRV8353RSRGZR, INA240A2PWR, MA732GQ-Z, TCAN1044VDRBRQ1 and LM5164DDAR. By type, the board carries 10 ICs and 6 transistors.

It belongs with the robotics & motion designs in this gallery.

From the project

Free browser-based mechatronics curriculum - zero prior knowledge to a verified simulated 2-DOF robot arm. No install. $0 hardware. MechaLab workbench included.

Step 10 costs 6.5-9 focused hours in total - 2-4.5 of lessons, 4.5 of arm modules - out of a 201.1-292 focused-hour course. Hours are each page's own metadata; docs/SYLLABUS.md is the full column, and docs/CURRICULUM.md maps steps to ids.

Last step: the course ends here, at the capstone.

If you are following the Beginner-First Track (Track P → Stage 0 → Track 00–08 Tier 1), complete this self-contained Python capstone simulation before building the physical 2-DOF arm:

Main components on the Mechatronics-Roadmap

Mechatronics-Roadmap bill of materials (BOM)

24 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32G474RET6
STMicroelectronics
U1
1
DRV8353RSRGZR
Texas Instruments
U2
3
INA240A2PWR
Texas Instruments
U3, U4, U5
1
MA732GQ-Z
Monolithic Power Systems
U6
1
TCAN1044VDRBRQ1
Texas Instruments
U7
1
LM5164DDAR
Texas Instruments
U8
1
TPS7A2033PDBVR
Texas Instruments
U9
1
SN74LVC2G08DCUR
Texas Instruments
U10
6
ISC030N08NM6
Infineon
Q1, Q2, Q3, Q4, Q5, Q6
2
EEH-ZA1K470P
C_BULK1, C_BULK2
6
GCM32ER72A225KA37L
C_HF1, C_HF2, C_HF3, C_HF4, C_HF5, C_HF6

Mechatronics-Roadmap design files

The KiCad project lives in the TLE47/Mechatronics-Roadmap repository on GitHub; these links point at the commit this page was built from.

Mechatronics-Roadmap: common questions

What microcontroller does the Mechatronics-Roadmap use?

The Mechatronics-Roadmap is built around the STM32G474RET6, from the STM32 family.

How many components are on the Mechatronics-Roadmap?

24 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Mechatronics-Roadmap design files?

From the TLE47/Mechatronics-Roadmap repository on GitHub, which has a netlist and the BOM; the links under Design files point to each one.

Can I use the Mechatronics-Roadmap design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which TLE47 chose for the repository.

Can I test firmware for the Mechatronics-Roadmap without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards