6 open source boards using the MA732GQ-Z
Real designs built with the MA732GQ-Z, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
O32controller
qwertpas
27 × 27 mm113 parts4LMIT37STM32
Dash48V
ShangqunYu
72 × 69.7 mm90 parts6LNo license0- schematic only · 24 partsSTM32
Mechatronics-Roadmap
TLE47
24 partsCC-BY-4.00 ${BOARD NAME} Assembly
EPFLXplore
45 × 43.5 mm21 parts4LApache-2.0347MCXN Reaction Wheel Board
oresat
35 × 50 mm210 parts6LGPL-2.021WCP Mag Encoder (WCP-2435)
RealtimeRoboticsGroup
19.9 × 27.8 mm22 parts4LSHL-2.11
How designs wire the MA732GQ-Z
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MA732GQ-Z connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 100 nF).
- The SSD pin is left unconnected on 4 of 5 designs.
- The Z pin is left unconnected on 4 of 5 designs.
- The TEST pin is tied to GND on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SSDpin 1 | Connected to: Not connected 80% · a signal 20% | — |
| Apin 2 | Connected to: Not connected 60% · a signal 40% | — |
| Zpin 3 | Connected to: Not connected 80% · a signal 20% | — |
| Bpin 6 | Connected to: Not connected 60% · a signal 40% | — |
| GNDpin 8 | Connected to: GND 100% | — |
| PWMpin 9 | Connected to: Not connected 60% · a signal 40% | — |
| TESTpin 10 | Connected to: GND 80% · not connected 20% | — |
| MGLpin 11 | Connected to: Not connected 60% · a signal 40% |
|
| VDDpin 13 | Connected to: 3.3V 100% |
|
| NCpin 14 | Connected to: Not connected 100% | — |
| MGHpin 16 | Connected to: Not connected 60% · a signal 40% |
|
| PADpin 17 | Connected to: GND 100% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ${BOARD NAME} Assembly by EPFLXplore, O32controller by qwertpas, MCXN Reaction Wheel Board by oresat and WCP Mag Encoder (WCP-2435) by RealtimeRoboticsGroup.
The MA732GQ-Z in open source designs
The gallery holds 6 open source boards using the MA732GQ-Z from 6 GitHub repositories; a typical one measures about 35 × 43.5 mm and carries around 57 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is ${BOARD NAME} Assembly by EPFLXplore.
Microcontrollers on boards using the MA732GQ-Z
What boards using the MA732GQ-Z are built for
MA732GQ-Z: common questions
Where can I find a MA732GQ-Z reference design?
Each of the 6 boards on this page is a real design using the MA732GQ-Z. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MA732GQ-Z VDD pin?
The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the MA732GQ-Z.
How is the MA732GQ-Z SSD pin connected?
The SSD pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MA732GQ-Z.
How is the MA732GQ-Z Z pin connected?
The Z pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MA732GQ-Z.
Which microcontrollers do boards using the MA732GQ-Z use?
Most are built on STM32 (2).
How big is a typical board using the MA732GQ-Z?
The median is 35 × 43.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the MA732GQ-Z?
By GitHub stars, ${BOARD NAME} Assembly by EPFLXplore, with 347 stars.
Can I simulate one of these boards using the MA732GQ-Z before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.