25 open source boards using the LM5164DDAR

Real designs built with the LM5164DDAR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

25 boardsClear filters|Most starred

How designs wire the LM5164DDAR

Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the LM5164DDAR connects to, and the resistors, capacitors and other passives placed on it.

  • The SW_8 pin has a series capacitor on 16 of 16 designs, most often 2.2 nF (then 100 nF).
  • The SW_8 pin has a inductor on 16 of 16 designs, most often 68 µH (then 33 µH).
  • The RON_4 pin has a resistor to GND on 15 of 16 designs, most often 100 kΩ (then 41.2 kΩ).
  • The FB_5 pin has a resistor to GND on 15 of 16 designs, most often 49.9 kΩ (then 100 kΩ).
GND_1pin 1Connected to: GND 94%
VIN_2pin 2Connected to: VBUS 88%
  • Decoupling capacitor on 75% · 2.2 µF (13), 100 nF (3), 10 µF (2)
EN/UVLO_3pin 3Connected to: Signal 63% · 50V 38%
  • Pull-up to VBUS on 50% · 100 kΩ (4), 140 kΩ (1), 300 kΩ (1)
  • Resistor to GND on 44% · 20 kΩ (2), 100 kΩ (2), 15 kΩ (1)
  • Capacitor to GND on 38% · 2.2 µF (9), 100 nF (1), 10 nF (1)
RON_4pin 4Connected to: Signal 100%
  • Resistor to GND on 94% · 100 kΩ (7), 41.2 kΩ (2), 50 kΩ (1)
FB_5pin 5Connected to: Signal 100%
  • Resistor to GND on 94% · 49.9 kΩ (5), 100 kΩ (2), 31.6 kΩ (2)
  • Series capacitor on 88% · 100 pF (3), 56 pF (3), 47 pF (2)
  • Pull-up to 5V on 81% · 100 kΩ (4), 365 kΩ (1), 45.3 kΩ (1)
PGOOD_6pin 6Connected to: Not connected 56% · a signal 44%
  • Pull-up to 3.3V on 38% · 10 kΩ (4), 100 kΩ (2)
BST_7pin 7Connected to: Signal 100%
  • Series capacitor on 94% · 2.2 nF (13), 100 nF (2)
SW_8pin 8Connected to: Signal 94%
  • Series capacitor on 100% · 2.2 nF (14), 100 nF (2)
  • Inductor on 100% · 68 µH (5), 33 µH (4), 47 µH (4)
  • Series resistor on 81% · 453 kΩ (4), 150 kΩ (2), 226 kΩ (1)
EP_9pin 9Connected to: GND 94%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include HPM5E31 ECatDualFOC by LX050724, Esc by iamdarshg, Bldc esc by EwoudVV and Gan buck converter by HexaGaN-org.

The LM5164DDAR in open source designs

The gallery holds 25 open source boards using the LM5164DDAR from 17 GitHub repositories; a typical one measures about 140.9 × 106.5 mm and carries around 184 components.

83% use four copper layers or more, and 20% carry an open source license.

The most starred is HPM5E31 ECatDualFOC by LX050724.

Microcontrollers on boards using the LM5164DDAR

LM5164DDAR: common questions

Where can I find a LM5164DDAR reference design?

Each of the 25 boards on this page is a real design using the LM5164DDAR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LM5164DDAR SW_8 pin connected?

The SW_8 pin has a series capacitor on 16 of 16 designs, most often 2.2 nF (then 100 nF). Counted from the KiCad layouts of 16 open source designs using the LM5164DDAR.

What resistor goes on the LM5164DDAR RON_4 pin?

The RON_4 pin has a resistor to GND on 15 of 16 designs, most often 100 kΩ (then 41.2 kΩ). Counted from the KiCad layouts of 16 open source designs using the LM5164DDAR.

What resistor goes on the LM5164DDAR FB_5 pin?

The FB_5 pin has a resistor to GND on 15 of 16 designs, most often 49.9 kΩ (then 100 kΩ). Counted from the KiCad layouts of 16 open source designs using the LM5164DDAR.

What parts are used alongside the LM5164DDAR?

The USBLC6-2SC6, INA240A1DR, SN74LVC2G08DCUR, DRV8353SRTAR and LM74700QDBVRQ1 appear in the most repositories here.

Which microcontrollers do boards using the LM5164DDAR use?

Most are built on STM32 (11), ESP32 (2), AVR/Arduino (1) and RP2040/RP2350 (1).

How big is a typical board using the LM5164DDAR?

The median is 140.9 × 106.5 mm, and 17% are two-layer designs.

What is the most popular open source board using the LM5164DDAR?

By GitHub stars, HPM5E31 ECatDualFOC by LX050724, with 14 stars.

Can I simulate one of these boards using the LM5164DDAR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part