Serial Interface for H10 Printer/Punch
tlsystems·H10-Paper-Tape-Reader-Punch·Kicad/H10 Pi Pico/H10 Pi Pico.kicad_pcb
About the Serial Interface for H10 Printer/Punch PCB
Serial Interface for H10 Printer/Punch is an open source RP2040/RP2350 PCB design by tlsystems, published on GitHub. It is a 4-layer board measuring 85 × 75 mm, with 38 components from 20 distinct parts.
Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the 74xx165, 74xx595, 74xx04 and MAX3232. By type, the board carries 10 capacitors, 10 resistors, 6 ICs, 5 transistors, 4 connectors and 2 diodes.
Main components on the Serial Interface for H10 Printer/Punch
Serial Interface for H10 Printer/Punch bill of materials (BOM)
38 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74xx165 | SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | 74xx595 | SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | 74xx04 | SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | MAX3232 | SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | ~ | 5V Buck Converter | U5 |
| 1 | RaspberryPi_Pico | RaspberryPi_Pico_Common_THT | U7 |
| 1 | BF545B | SOT-23 | Q1 |
| 4 | BSS138 | SOT-23 | Q2, Q3, Q4, Q5 |
| 1 | H10 ReaderPunch | PinHeader_2x13_P2.54mm_Horizontal | J1 |
| 1 | USB-C | USB-C_Breakout | J2 |
| 1 | FTDI_USB | PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | USB Cable | JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J5 |
| 1 | Switch | SW_PB_Wurth_5x4mm | SW2 |
| 2 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 4 | 0.1uF | C_0603_1608Metric | C1, C2, C3, C4 |
| 4 | 1uF | C_0603_1608Metric | C5, C6, C7, C8 |
| 1 | 10uF | C_0805_2012Metric | C9 |
| 1 | 22uF | C_0805_2012Metric | C10 |
| 2 | 1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 8 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R6, R7, R8, R9, R10 |
Serial Interface for H10 Printer/Punch design files
The KiCad project lives in the tlsystems/H10-Paper-Tape-Reader-Punch repository on GitHub; these links point at the commit this page was built from.
Serial Interface for H10 Printer/Punch: common questions
What microcontroller does the Serial Interface for H10 Printer/Punch use?
The Serial Interface for H10 Printer/Punch is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.
How big is the Serial Interface for H10 Printer/Punch PCB?
The Serial Interface for H10 Printer/Punch measures 85 × 75 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Serial Interface for H10 Printer/Punch?
38 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Serial Interface for H10 Printer/Punch design files?
From the tlsystems/H10-Paper-Tape-Reader-Punch repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Serial Interface for H10 Printer/Punch design in my own project?
The repository has no license, so all rights stay with tlsystems. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Serial Interface for H10 Printer/Punch without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in H10-Paper-Tape-Reader-Punch
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k