Jtag sniffer jig
tnishinaga·seccamp2022_pcb·jtag_sniffer_jig/jtag_sniffer_jig.kicad_pcb
About the Jtag sniffer jig PCB
Jtag sniffer jig is an open source RP2040/RP2350 PCB design by tnishinaga, published on GitHub. It is a 2-layer board measuring 28.4 × 47.9 mm, with 4 components from 4 distinct parts.
Its main chip is the RP2040_SWD, from the RP2040/RP2350 family.
It belongs with the usb & debug tools designs in this gallery.
Jtag sniffer jig bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USB4085-GF-A Conn_ARM_JTAG_SWD_20 | PinSocket_2x10_P2.54mm_Horizontal | J1 |
| 1 | Conn_02x10_Odd_Even | PinHeader_2x10_P2.54mm_Vertical | J2 |
| 1 | RP2040_SWD Conn_ARM_JTAG_SWD_20 | IDC-Header_2x10_P2.54mm_Horizontal | J3 |
| 1 | CONN_ARM_JTAG_SWD_20 BusPirateConn | IDC-Header_2x05_P2.54mm_Vertical | J4 |
Jtag sniffer jig design files
The KiCad project lives in the tnishinaga/seccamp2022_pcb repository on GitHub; these links point at the commit this page was built from.
Jtag sniffer jig: common questions
What microcontroller does the Jtag sniffer jig use?
The Jtag sniffer jig is built around the RP2040_SWD, from the RP2040/RP2350 family.
How big is the Jtag sniffer jig PCB?
The Jtag sniffer jig measures 28.4 × 47.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Jtag sniffer jig?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Jtag sniffer jig design files?
From the tnishinaga/seccamp2022_pcb repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Jtag sniffer jig design in my own project?
The repository has no license, so all rights stay with tnishinaga. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Jtag sniffer jig without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in seccamp2022_pcb
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k