HardLabs

Cmsis dap rp2040

tnishinaga·seccamp2022_pcb·cmsis-dap_rp2040/cmsis-dap_rp2040.kicad_pcb

Cmsis dap rp2040 PCB layout, top view — open source RP2040/RP2350 board by tnishinaga
Simulate this board

About the Cmsis dap rp2040 PCB

Cmsis dap rp2040 is an open source RP2040/RP2350 PCB design by tnishinaga, published on GitHub. It is a 2-layer board measuring 50 × 34 mm, with 47 components from 22 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the SIT2001B, W25Q16JVSSIM and NCP1117ST33T3G. By type, the board carries 18 capacitors, 16 resistors, 4 ICs, 4 diodes, 3 connectors and 2 inductors.

Main components on the Cmsis dap rp2040

SIT2001BW25Q16JVSSIMRP2040NCP1117ST33T3G

Cmsis dap rp2040 bill of materials (BOM)

47 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SIT2001B
U1
1
W25Q16JVSSIM
U2
1
RP2040
U3
1
NCP1117ST33T3G
U4
1
USB_C_Receptacle_USB2.0
J1
1
BOOT
J2
1
Conn_ARM_JTAG_SWD_20
J4
1
PRTR5V0U2X
D1
1
MBR130T3G
D2
1
RED
D3
1
GREEN
D4
2
N.F.
L1, L2
13
0.1uF
C1, C2, C6, C7, C8, C9, C11, C13 +5
1
0.001uF/N.F.
C3
2
10uF
C4, C10
2
1uF
C5, C12
2
10k
R1, R2
2
5.1k
R3, R4
2
27
R5, R6
2
1k
R7, R10
Show 2 more
QtyPartRefs
1
100k
R8
7
0
R9, R11, R12, R13, R14, R15, R16

Cmsis dap rp2040 design files

The KiCad project lives in the tnishinaga/seccamp2022_pcb repository on GitHub; these links point at the commit this page was built from.

Cmsis dap rp2040: common questions

What microcontroller does the Cmsis dap rp2040 use?

The Cmsis dap rp2040 is built around the RP2040, from the RP2040/RP2350 family.

How big is the Cmsis dap rp2040 PCB?

The Cmsis dap rp2040 measures 50 × 34 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Cmsis dap rp2040?

47 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Cmsis dap rp2040 design files?

From the tnishinaga/seccamp2022_pcb repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Cmsis dap rp2040 design in my own project?

The repository has no license, so all rights stay with tnishinaga. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Cmsis dap rp2040 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in seccamp2022_pcb

Similar boards