Transparent devboard
toby-alpha·transparent-devboard·KiCAD Files/DevBoard ESP32-rounded.kicad_pcb
About the Transparent devboard PCB
Transparent devboard is an open source ESP32 PCB design by toby-alpha, published on GitHub. It is a 4-layer board measuring 21.6 × 35.8 mm, with 28 components from 17 distinct parts.
Its main chip is the ESP32-C3-MINI-1-H4(4MB), from the ESP32 family. Other key parts include the AP2112K-3.3TRG1. By type, the board carries 8 resistors, 7 capacitors, 3 connectors, 3 LEDs, 2 ICs and 2 switches.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
unforchantly due to manufacturing constraints, the transparent board has to come to an end.. (it was 300USD for 20 transparents). I'll look for ways to produce it after this, and probably persue it as a personal endeavor.
unforchantly due to manufacturing constraints, the transparent board has to come to an end.. (it was 300USD for 20 transparents). I'll look for ways to produce it after this, and probably persue it as a personal endeavor.
The Dev Board is based off the ESP32 C3 Mini module. It contains a USB-C port, power LED, user LED, 3x WS2812B 2020 Adressable LEDs, >6V voltage input, as well as all GPIO being broken out. The USB-C connector is inline to conform to a slim profile. It also has a JST SH connector for i2C connections.

Main components on the Transparent devboard
Transparent devboard bill of materials (BOM)
28 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-MINI-1-H4(4MB) | WIFIM-SMD_ESP32-C3-MINI-1 | U1 |
| 1 | AP2112K-3.3TRG1 | SOT-25-5_L2.9-W1.6-P0.95-LS2.8-BL | U2 |
| 1 | BM04B-SRSS-TB(LF)(SN) | CONN-SMD_BM04B-SRSS-TB | CN1 |
| 2 | Conn_01x09_Pin | PinSocket_1x09_P2.54mm_Vertical | J1, J2 |
| 2 | TSA343G00D-250J2 | SW-SMD_L4.0-W2.9-P4.15-EH | SW1, SW2 |
| 1 | GT-USB-7058 | USB-C-SMD_GT-USB-7058 | USB1 |
| 3 | XL-2020RGBC-WS2812B | LED-SMD_4P-L2.0-W2.0-BR-1 | LED1, LED2, LED3 |
| 1 | Blue LED | LED_0805_2012Metric | D1 |
| 1 | Green LED | LED_0805_2012Metric | D2 |
| 2 | 10uF | C_0805_2012Metric | C1, C3 |
| 4 | 100nF | C_0603_1608Metric | C2, C5, C6, C8 |
| 1 | 1uF | C_0603_1608Metric | C4 |
| 2 | 5.1k | R_0603_1608Metric | R1, R3 |
| 2 | 4.7k | R_0603_1608Metric | R2, R8 |
| 1 | 100 | R_0603_1608Metric | R4 |
| 1 | 220 | R_0603_1608Metric | R5 |
| 2 | 10k | R_0603_1608Metric | R6, R7 |
Transparent devboard design files
The KiCad project lives in the toby-alpha/transparent-devboard repository on GitHub; these links point at the commit this page was built from.
Transparent devboard: common questions
What microcontroller does the Transparent devboard use?
The Transparent devboard is built around the ESP32-C3-MINI-1-H4(4MB), from the ESP32 family.
How big is the Transparent devboard PCB?
The Transparent devboard measures 21.6 × 35.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Transparent devboard?
28 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Transparent devboard design files?
From the toby-alpha/transparent-devboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Transparent devboard design in my own project?
The repository has no license, so all rights stay with toby-alpha. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Transparent devboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k