Toby hackpad
tobycm·toby-hackpad
About the Toby hackpad PCB
Toby hackpad is an open source RP2040/RP2350 PCB design by tobycm, published on GitHub. It is a 2-layer board measuring 87.2 × 97 mm, with 34 components from 9 distinct parts.
Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. Other key parts include the MCP23017_SO. By type, the board carries 12 diodes, 10 switches, 6 capacitors, 2 ICs, 2 resistors and 1 connector.
It belongs with the keyboards designs in this gallery.
Main components on the Toby hackpad
Toby hackpad bill of materials (BOM)
34 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-RP2040-DIP | XIAO-RP2040-DIP | U1 |
| 1 | MCP23017_SO | SOIC-28W_7.5x17.9mm_P1.27mm | U2 |
| 1 | Conn_01x06_Pin | PinSocket_1x06_P2.54mm_Vertical | J1 |
| 1 | ~ | PinHeader_1x08_P2.54mm_Vertical | DISPLAY1 |
| 10 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +2 |
| 12 | SK6812MINI | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D1, D2, D3, D4, D5, D6, D7, D8 +4 |
| 5 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C4, C5, C6 |
| 1 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 2 | 4.7K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
Toby hackpad design files
The KiCad project lives in the tobycm/toby-hackpad repository on GitHub; these links point at the commit this page was built from.
Toby hackpad: common questions
What microcontroller does the Toby hackpad use?
The Toby hackpad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.
How big is the Toby hackpad PCB?
The Toby hackpad measures 87.2 × 97 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Toby hackpad?
34 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Toby hackpad design files?
From the tobycm/toby-hackpad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Toby hackpad design in my own project?
The repository has no license, so all rights stay with tobycm. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Toby hackpad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k