F18-DDI
Tolga-Cav·F18-DDI·PCB/F18_DDI.kicad_pcb
About the F18-DDI PCB
F18-DDI is an open source RP2040/RP2350 PCB design by Tolga-Cav, published on GitHub under the MIT license. It is a 2-layer board measuring 160.3 × 190.1 mm, with 67 components from 6 distinct parts.
Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 43 resistors, 21 switches and 1 module.
It belongs with the displays & leds designs in this gallery.
From the project
Standalone F18 DDI with a screen to serve as general purpose second display for DCS
Main components on the F18-DDI
F18-DDI bill of materials (BOM)
67 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RaspberryPi_Pico | RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | R10307RR02Q | R10305RN02Q | S1 |
| 20 | TL1240GQ | TL1240GQ | S2, S3, S4, S5, S6, S7, S8, S9 +12 |
| 2 | PDB12-H4201-103BF | PDB12H4201103BF | VR1, VR2 |
| 23 | 10K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R12 +15 |
| 20 | 150 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R9, R10, R11, R16, R17, R18, R19 +12 |
F18-DDI design files
The KiCad project lives in the Tolga-Cav/F18-DDI repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/F18_DDI.kicad_pcb
- SchematicPCB/F18_DDI.kicad_sch
- BOMPCB/production/bom.csv
F18-DDI: common questions
What microcontroller does the F18-DDI use?
The F18-DDI is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.
How big is the F18-DDI PCB?
The F18-DDI measures 160.3 × 190.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the F18-DDI?
67 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the F18-DDI design files?
From the Tolga-Cav/F18-DDI repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the F18-DDI design in my own project?
Yes, under the terms of its MIT license, which Tolga-Cav chose for the repository.
Can I test firmware for the F18-DDI without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k