HardLabs

PCB-ruler for my electronics club

Tomas-Kuchta-FPV·PCB-ruler-for-my-electronics-club·PCB/PCBruler.kicad_pcb

PCB-ruler for my electronics club layout, top view — open source ESP32 board by Tomas-Kuchta-FPV

About the PCB-ruler for my electronics club

PCB-ruler for my electronics club is an open source ESP32 PCB design by Tomas-Kuchta-FPV, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 156 × 26 mm, with 21 components from 21 distinct parts.

Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the SOIC-8_5.3X5.3MM_P1.27MM, SOIC-16_3.9X9.9MM_P1.27MM, QFN-32-1EP_4X4MM_P0.4MM_EP2.65X2.65MM, LQFP-64-1EP_10X10MM_P0.5MM_EP5X5MM and TO-252-2. By type, the board carries 8 ICs, 4 diodes, 3 transistors, 3 resistors, 2 capacitors and 1 connector.

From the project

A simple PCB ruller with all of the basic things

Your Kicad project files goes here. > Readme generated with a Kicad-Template.

Main components on the PCB-ruler for my electronics club

SOIC-8_5.3X5.3MM_P1.27MMSOIC-16_3.9X9.9MM_P1.27MMQFN-32-1EP_4X4MM_P0.4MM_EP2.65X2.65MMLQFP-64-1EP_10X10MM_P0.5MM_EP5X5MMTO-252-2SOT-223TFBGA-64_5X5MM_LAYOUT8X8_P0.5MMESP32-WROOM-32E

PCB-ruler for my electronics club bill of materials (BOM)

21 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SOIC-8_5.3X5.3MM_P1.27MM
SOIC-8_5.3x5.3mm_P1.27mm
U1
1
SOIC-16_3.9X9.9MM_P1.27MM
SOIC-16_3.9x9.9mm_P1.27mm
U2
1
QFN-32-1EP_4X4MM_P0.4MM_EP2.65X2.65MM
QFN-32-1EP_4x4mm_P0.4mm_EP2.65x2.65mm
U4
1
LQFP-64-1EP_10X10MM_P0.5MM_EP5X5MM
LQFP-64-1EP_10x10mm_P0.5mm_EP5x5mm
U5
1
TO-252-2
U6
1
SOT-223
U7
1
TFBGA-64_5X5MM_LAYOUT8X8_P0.5MM
TFBGA-64_5x5mm_Layout8x8_P0.5mm
U8
1
ESP32-WROOM-32E
LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm
U9
1
TO-92
Q1/T1
1
TO-220-3_Vertical
Q2/T2
1
SOT-323_SC-70
Q3/T3
1
USB_C_RECEPTACLE_HRO_TYPE-C-31-M-12
USB_C_Receptacle_HRO_TYPE-C-31-M-12
J1
1
D_DO-41_SOD81_P10.16MM_HORIZONTAL
D_DO-41_SOD81_P10.16mm_Horizontal
D1
1
D_SMA
D2
1
LED_D5.0mm
D3
1
LED
D7
1
CP_RADIAL_D6.3MM_P2.50MM
CP_Radial_D6.3mm_P2.50mm
C1
1
C_DISC_D6.0MM_W2.5MM_P5.00MM
C_Disc_D6.0mm_W2.5mm_P5.00mm
C2
1
R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal
R1
1
POTENTIOMETER_ACP_CA9-V10_VERTICAL
Potentiometer_ACP_CA9-V10_Vertical
R2
Show 1 more
QtyPartRefs
1
67R
R6

PCB-ruler for my electronics club design files

The KiCad project lives in the Tomas-Kuchta-FPV/PCB-ruler-for-my-electronics-club repository on GitHub; these links point at the commit this page was built from.

PCB-ruler for my electronics club: common questions

What microcontroller does the PCB-ruler for my electronics club use?

The PCB-ruler for my electronics club is built around the ESP32-WROOM-32E, from the ESP32 family.

How big is the PCB-ruler for my electronics club?

The PCB-ruler for my electronics club measures 156 × 26 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB-ruler for my electronics club?

21 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PCB-ruler for my electronics club design files?

From the Tomas-Kuchta-FPV/PCB-ruler-for-my-electronics-club repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PCB-ruler for my electronics club design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which Tomas-Kuchta-FPV chose for the repository.

Can I test firmware for the PCB-ruler for my electronics club without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards