RPi Pico-V1

TomasD-git·RPi_Pico-V1·RPI Pico_PCB/RPI Pico.kicad_pcb

RPi Pico-V1 PCB layout, top view — open source RP2040/RP2350 board by TomasD-git

About the RPi Pico-V1 PCB

RPi Pico-V1 is an open source RP2040/RP2350 PCB design by TomasD-git, published on GitHub under the MIT license. It is a 4-layer board measuring 21 × 51 mm, with 45 components from 27 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the TPS63001DRCR and W25Q128JVSIQ. By type, the board carries 20 capacitors, 15 resistors, 3 ICs, 1 transistor, 1 crystal and 1 switch.

From the project

- Supports any firmware compatible with rpi pico, just make sure to select 16mb flash to use full storage.

- Supports any firmware compatible with rpi pico, just make sure to select 16mb flash to use full storage.

i made this project because RPi picos dont have usb-c port and have less storage

RPi Pico-V1, from the project README
From the project README

Main components on the RPi Pico-V1

RPi Pico-V1 bill of materials (BOM)

45 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS63001DRCR
TI(德州仪器)
U1
1
W25Q128JVSIQ
W25Q128JVSIQTR
Winbond(华邦)
U2
1
RP2040
Raspberry Pi(树莓派)
U3
1
DMG1012T
DMG1012T_C2830301
TECH PUBLIC(台舟)
Q1
1
XL2EL89COI-111YLC-12M
XL2EL89COI-111YLC-12MHz
YXC(扬兴晶振)
X1
1
TS3425BA
SHOU HAN(首韩)
SW1
1
TYPE-C 16PIN 2MD(073)
TYPE-C 16PIN 2MD
SHOU HAN(首韩)
USB1
1
XL-1608UGC-04
XINGLIGHT(成兴光)
LED1
1
MBR120VLSFT1G
onsemi(安森美)
D1
1
APH252012C2R2MP01
2.2u
APV
L1
2
CL31A476MPHNNNE
47uF
Samsung Electro-Mechanics
C1, C3
2
100nF
C2, C20
9
CC0603KRX7R9BB104
100nF
YAGEO
C4, C9, C10, C11, C12, C13, C14, C15 +1
3
CL21A225KBQNNNE
2.2uF
Samsung Electro-Mechanics
C5, C17, C18
1
GCM1555C1H102FA16D
1nF
Murata Electronics
C6
2
GRM1555C1H150GA01D
15pF
Murata Electronics
C7, C8
1
2.2uF
C19
2
5.1K
R1, R2
1
0603WAF5601T5E
5.6K
UNI-ROYAL(Uniroyal Elec)
R3
1
RT0603BRD0710KL
10K
YAGEO
R4
Show 7 more
QtyPartRefs
3
0603WAF1003T5E
100K
UNI-ROYAL(Uniroyal Elec)
R5, R6, R9
2
0603WAF1001T5E
1K
UNI-ROYAL(Uniroyal Elec)
R7, R11
1
0805W8F2003T5E
200K
UNI-ROYAL(Uniroyal Elec)
R8
1
0603WAF4700T5E
470
UNI-ROYAL(Uniroyal Elec)
R10
2
0603WAF270JT5E
27
UNI-ROYAL(Uniroyal Elec)
R12, R13
1
1
R14
1
200
R15

RPi Pico-V1 design files

The KiCad project lives in the TomasD-git/RPi_Pico-V1 repository on GitHub; these links point at the commit this page was built from.

RPi Pico-V1: common questions

What microcontroller does the RPi Pico-V1 use?

The RPi Pico-V1 is built around the RP2040, from the RP2040/RP2350 family.

How big is the RPi Pico-V1 PCB?

The RPi Pico-V1 measures 21 × 51 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the RPi Pico-V1?

45 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RPi Pico-V1 design files?

From the TomasD-git/RPi_Pico-V1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the RPi Pico-V1 design in my own project?

Yes, under the terms of its MIT license, which TomasD-git chose for the repository.

Can I test firmware for the RPi Pico-V1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards