Split-Keyboard
TomasD-git·Split-Keyboard·KiCad/Splitt Keyboard.kicad_pcb
About the Split-Keyboard PCB
Split-Keyboard is an open source ESP32 PCB design by TomasD-git, published on GitHub under the MIT license. It is a 2-layer board measuring 336.8 × 150 mm, with 136 components from 10 distinct parts.
Its main chip is the ESP32-S3-DEVKITC-1-N8R2, from the ESP32 family. By type, the board carries 67 switches, 67 diodes and 2 ICs.
It belongs with the keyboards designs in this gallery.
From the project
split keyboard, basically modified 60 precent
Main components on the Split-Keyboard
Split-Keyboard bill of materials (BOM)
136 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ESP32-S3-DEVKITC-1-N8R2 | XCVR_ESP32-S3-DEVKITC-1-N8R2 | U2, U3 |
| 51 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +43 |
| 1 | SW_Push | SW_Cherry_MX_2.00u_PCB | SW14 |
| 2 | SW_Push | SW_Cherry_MX_1.50u_PCB | SW16, SW29 |
| 1 | SW_Push | SW_Cherry_MX_1.75u_PCB | SW31 |
| 2 | SW_Push | SW_Cherry_MX_2.25u_PCB | SW43, SW45 |
| 1 | SW_Push | SW_Cherry_MX_2.75u_PCB | SW56 |
| 7 | SW_Push | SW_Cherry_MX_1.25u_PCB | SW58, SW59, SW60, SW63, SW64, SW65, SW66 |
| 2 | SW_Push | SW_Cherry_MX_PCB_3.00u | SW61, SW62 |
| 67 | 1N4148WT | D_SOD-523 | D1, D2, D3, D4, D5, D6, D7, D8 +59 |
Split-Keyboard design files
The KiCad project lives in the TomasD-git/Split-Keyboard repository on GitHub; these links point at the commit this page was built from.
- LayoutKiCad/Splitt Keyboard.kicad_pcb
- SchematicKiCad/Splitt Keyboard.kicad_sch
- BOMBOM.csv
Split-Keyboard: common questions
What microcontroller does the Split-Keyboard use?
The Split-Keyboard is built around the ESP32-S3-DEVKITC-1-N8R2, from the ESP32 family.
How big is the Split-Keyboard PCB?
The Split-Keyboard measures 336.8 × 150 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Split-Keyboard?
136 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Split-Keyboard design files?
From the TomasD-git/Split-Keyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Split-Keyboard design in my own project?
Yes, under the terms of its MIT license, which TomasD-git chose for the repository.
Can I test firmware for the Split-Keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k