Vwcdpic THT
About the Vwcdpic THT PCB
Vwcdpic THT is an open source PIC PCB design by tomaskovacik, published on GitHub under the GPL-2.0 license. It is a board measuring 31 × 16.6 mm, with 11 components from 8 distinct parts.
Its main chip is the PIC12F629, from the PIC family. Other key parts include the 78L05. By type, the board carries 4 resistors, 3 capacitors and 2 ICs.
From the project
This is my personal fork of k9spud vwcdpic project
- made in kicad http://kicad.org - smd version - tht version for home manufacture - for better audio input level, build preamplifier: https://github.com/tomaskovacik/hw/tree/master/kicad/audio_preamplifier
Main components on the Vwcdpic THT
Vwcdpic THT bill of materials (BOM)
11 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC12F629 | DIP-8__300_ELL | U1 |
| 1 | 78L05 | TO92-STABIL | U2 |
| 1 | CONN_01X04 | Pin_Header_Straight_1x04 | ICSP_UART1 |
| 1 | CONN_01X05 | Pin_Header_Straight_1x05 | RADIO1 |
| 1 | 1uF/6.3V | C_Radial_D5_L11_P2.5 | C1 |
| 2 | 100n | C_Rect_L7_W2.5_P5 | C2, C3 |
| 1 | 10k | Resistor_Horizontal_RM10mm | R1 |
| 3 | 3k3 | Resistor_Horizontal_RM10mm | R5, R6, R7 |
Vwcdpic THT design files
The KiCad project lives in the tomaskovacik/vwcdpic repository on GitHub; these links point at the commit this page was built from.
- Layouthw/vwcdpic_THT.kicad_pcb
Vwcdpic THT: common questions
What microcontroller does the Vwcdpic THT use?
The Vwcdpic THT is built around the PIC12F629, from the PIC family.
How big is the Vwcdpic THT PCB?
The Vwcdpic THT measures 31 × 16.6 mm and is 1.6002 mm thick.
How many components are on the Vwcdpic THT?
11 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Vwcdpic THT design files?
From the tomaskovacik/vwcdpic repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Vwcdpic THT design in my own project?
Yes, under the terms of its GPL-2.0 license, which tomaskovacik chose for the repository.
Can I test firmware for the Vwcdpic THT without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in vwcdpic
Similar boards
PICPslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7k
PICLens
ervanalb
80 × 80 mm53 parts4LNo license515
PICMicro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414
PICGB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0376
PICGB-MBCTEST
51.4 × 61 mm32 parts2LCC-BY-4.0376
PICGB-BENCH-G1
100 × 100 mm98 parts4LCC-BY-4.0376