45 open source boards using the 78L05
Real designs built with the 78L05, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Hardmpu wt
PickledDog
106.1 × 95.4 mm46 parts2LApache-2.030MiniDJ Back
Thorinair
29.5 × 108.6 mm182 parts2LCC-BY-SA-4.025STM32
OwmBoard
kanengomibako
55.4 × 66 mm158 parts2LUnlicense113458A-A3-66533-2021-KS-RoHS-SMD
EleDes
213 × 136 mm399 parts4LCC0-1.08Microchip SAM
IMX6ULL tryout
cebrax
100 × 75 mm171 parts4LGPL-3.08PIC
Hope bike
Le-Dome-RDS
129 × 66 mm88 parts2LNo license8AVR/Arduino
Gruvin9x
gruvin
168.5 × 54.5 mm261 partsNo license7Pedal snow white autowah single
dvhx
60.8 × 116.5 mm112 parts2LGPL-3.07AVR/Arduino
Nixie clock
njeff
148.1 × 37.1 mm29 parts2LNo license7AVR/Arduino
Mhi xy bus
iblue
91.4 × 40.6 mm66 parts2LNo license6Tribus
pferreir
30 × 106 mm109 parts2LNo license5PIC
Icaro
valentinbasel
81.3 × 76.3 mm79 partsGPL-3.05AVR/Arduino
Cable Test Master
juniperlynx
50.8 × 61.6 mm59 parts2LMIT5TI MSP430/CC
Huracan MkIII PreAmp Board
terjeio
175 × 86 mm175 parts2LNo license2AVR/Arduino
Labrador backup
EspoTek
36.8 × 34.7 mm75 parts2LNo license1ESP32
Serrasoid TRX 29M
kazushinjo
170 × 150 mm328 parts4LGPL-3.00PSN TRX XIAO ESP32C3-V2
kazushinjo
134 × 129.6 mm277 parts4LGPL-3.00RISC-V
TouchSynth
cpldcpu
100 × 100 mm201 parts4LMIT0MPBCH32M030DS0 panel
ghostinkoma
97.9 × 95.6 mm149 parts2LCustom license0Combined-II
sbv1307
174.9 × 67 mm83 parts2LNo license0AVR/Arduino
Gain box psu
carmisergio
175 × 85 mm60 parts2LNo license0- schematic only · 57 parts
Tremolo-Matic-X
soggybag
57 partsNo license0 - schematic only · 56 partsSTM32
Protein dispenser
psaundalkar
56 partsMIT0 CVMod8 V2 Main
Thorinair
100.8 × 108.6 mm161 parts2LCC-BY-SA-4.025PedalMeetingHeadphoneAmp RevD
kanengomibako
100 × 80 mm121 parts2LUnlicense11Actionneur piezo
palginpav
100.7 × 80 mm68 parts2LApache-2.01VCA
ukmaker
100 × 80 mm35 parts2LNo license1Solartron 7075 interface unplaced
cHemingway
74.4 × 72.9 mm93 parts2LNo license0Puff Main
Thorinair
39.8 × 108.6 mm133 parts2LCC-BY-SA-4.025Oscilloscopio
ciaa
85.7 × 137.2 mm58 parts2LNo license15TrueBypassRelayModuleTHD
kanengomibako
24.5 × 24.5 mm27 parts4LUnlicense4PIC
Vwcdpic THT
tomaskovacik
31 × 16.6 mm11 partsGPL-2.029Actionneur piezo
circuitly
100.7 × 80 mm68 parts2LNo license0PIC
Mfx link2
GBert
50 × 50 mm61 parts2LNo license99MiniDJ Main
Thorinair
29.5 × 108.6 mm89 parts2LCC-BY-SA-4.025AVR/Arduino
TrueBypassRelayModuleMicro
kanengomibako
17.9 × 15 mm19 parts2LUnlicense4
How designs wire the 78L05
Read from the KiCad layouts of 33 open source designs, one per repository: what each pin of the 78L05 connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin has a decoupling capacitor on 15 of 25 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VOpin 1 | Connected to: 5V 72% · a signal 28% |
|
| GNDpin 2 | Connected to: GND 83% | — |
| VIpin 3 | Connected to: 12V 64% · a signal 28% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Actionneur piezo by claynicholson, Mfx link2 by GBert, Hardmpu wt by PickledDog and Vwcdpic THT by tomaskovacik.
The 78L05 in open source designs
The gallery holds 45 open source boards using the 78L05 from 34 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 75 components.
80% are two-layer designs, the rest use four layers or more, and 62% carry an open source license.
The most starred is Actionneur piezo by claynicholson.
Parts used alongside the 78L05
Microcontrollers on boards using the 78L05
What boards using the 78L05 are built for
78L05: common questions
Where can I find a 78L05 reference design?
Each of the 45 boards on this page is a real design using the 78L05. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 78L05 VO pin?
The VO pin has a decoupling capacitor on 15 of 25 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 33 open source designs using the 78L05.
What parts are used alongside the 78L05?
The 79L05, ICL7660, LM324, LM358N and LM358 appear in the most repositories here.
Which microcontrollers do boards using the 78L05 use?
Most are built on AVR/Arduino (8), PIC (4), STM32 (2) and TI MSP430/CC (1).
How big is a typical board using the 78L05?
The median is 100 × 80 mm, and 80% are two-layer designs.
What is the most popular open source board using the 78L05?
By GitHub stars, Actionneur piezo by claynicholson, with 102 stars.
Can I simulate one of these boards using the 78L05 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.