16 open source boards using the PIC12F629
Real designs built with the PIC12F629, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
NuXT
monotech
184.9 × 243.8 mm214 parts4LGPL-3.0120PIC
SNES AdvancedFlash 1-2
MouseBiteLabs
116.2 × 77.7 mm59 parts2LCC-BY-SA-4.068AVR/Arduino
Sgb mbc5 1-4
MouseBiteLabs
110.7 × 69.8 mm88 parts4LCC-BY-SA-4.040PIC
C64-Kernal-Switcher
tebl
20.3 × 47.6 mm12 parts2LCERN-OHL-1.232PIC
Nano8088
monotech
110.1 × 101.6 mm75 partsGPL-3.017PIC
Another AT2XT
hkzlab
37.1 × 17.5 mm9 parts2LCC-BY-NC-4.04PIC
Intel wildcard-88-motherboard
skiselev
116.8 × 165.1 mm75 parts2LCERN-OHL-S-2.01PIC
Micro 8088
Vakon84
152.4 × 101.6 mm71 partsGPL-3.00PIC
SNES HiROM Flash 1-2
MouseBiteLabs
116.2 × 77.7 mm52 parts2LCC-BY-SA-4.068PIC
Programador de PIC12F629 - shield para Arduino Uno
legendaryredfox
52.6 × 53.3 mm14 parts2LCustom license1PIC
SNES LoROM Flash 1-2
MouseBiteLabs
112.2 × 77.7 mm52 parts2LCC-BY-SA-4.068PIC
Vwcdpic
tomaskovacik
14.6 × 13.1 mm11 parts2LGPL-2.029PIC
SNES Advanced UV 1-0 new
MouseBiteLabs
116.2 × 79.2 mm47 parts2LCC-BY-SA-4.068PIC
Vwcdpic THT
tomaskovacik
31 × 16.6 mm11 partsGPL-2.029PIC
SNES Basic UV 1-1
MouseBiteLabs
110.2 × 77.8 mm40 parts2LCC-BY-SA-4.068
How designs wire the PIC12F629
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the PIC12F629 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 7 of 11 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: VCC 100% |
|
| GP3pin 4 | Connected to: A connector 36% |
|
| GP2pin 5 | Connected to: A connector 73% |
|
| VSSpin 8 | Connected to: GND 100% | — |
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Micro 8088 by skiselev, NuXT by monotech, SNES Advanced UV 1-0 new by MouseBiteLabs and Sgb mbc5 1-4 by MouseBiteLabs.
The PIC12F629 in open source designs
The gallery holds 16 open source boards using the PIC12F629 from 11 GitHub repositories; a typical one measures about 111.4 × 77.7 mm and carries around 52 components.
83% are two-layer designs, the rest use four layers or more, and 88% carry an open source license.
The most starred is Micro 8088 by skiselev.
Parts used alongside the PIC12F629
Microcontrollers on boards using the PIC12F629
What boards using the PIC12F629 are built for
PIC12F629: common questions
Where can I find a PIC12F629 reference design?
Each of the 16 boards on this page is a real design using the PIC12F629. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the PIC12F629 VDD pin?
The VDD pin has a decoupling capacitor on 7 of 11 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 11 open source designs using the PIC12F629.
What parts are used alongside the PIC12F629?
The 74F245, 74F244, 74F573, 8087 and 8088 appear in the most repositories here.
Which microcontrollers do boards using the PIC12F629 use?
Most are built on PIC (15) and AVR/Arduino (1).
How big is a typical board using the PIC12F629?
The median is 111.4 × 77.7 mm, and 83% are two-layer designs.
What is the most popular open source board using the PIC12F629?
By GitHub stars, Micro 8088 by skiselev, with 414 stars.
Can I simulate one of these boards using the PIC12F629 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.