Screen power hand.placed

tomassasovsky·segno-hardware·hardware/kicad/screen_power/hand/screen_power_hand.placed.kicad_pcb

Screen power hand.placed PCB layout, top view — open source board by tomassasovsky

About the Screen power hand.placed PCB

Screen power hand.placed is an open source PCB design by tomassasovsky, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 68 × 76 mm, with 42 components from 26 distinct parts.

By type, the board carries 10 resistors, 8 connectors, 7 transistors, 6 capacitors, 5 fuses and 3 relays.

From the project

Segno hardware: boards, sheet-metal enclosure, printed parts and decals

Revision P removes two obsolete ground-fill exclusions beside mounting hole H1, restoring its smooth ground-copper contour. All tracks, pads, placements and electrical connections remain unchanged. It retains each USB cable's shield through a fifth XH contact, so the complete cable disconnects at its plug. It retains Revision N's through-hole power relay and removable main fuse. The four branch fuses remain soldered to keep cost and size down.

Screen power hand.placed bill of materials (BOM)

42 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
2N3904BU
2N3904
Q1
1
2N3906BU
2N3906
Q2
1
IRLZ44NPBF
IRLZ44N
Q5
4
TN0702N3-G
TN0702
Q101, Q102, Q201, Q202
1
AUX 5V INPUT
J1
1
GPIO17 / GND
J2
2
PI USB / XH5
J101, J201
2
TOUCH / XH5
J102, J202
1
SCREEN 1 POWER
J103
1
SCREEN 2 POWER
J203
1
0001.2513
8A time-lag
F1
2
0697H4000-02
4A time-lag
F101, F201
2
0697H0800-02
800mA time-lag
F102, F202
1
G6C-1117P-US
K1
2
1-1462037-3
IM02TS
K101, K201
1
P6KE6.8CA
D3
2
1N4007G
1N4007
D101, D201
3
K104K10X7RF53H5
100nF 50V X7R
C1, C101, C201
1
EEU-FR1A221
220uF 10V
C2
2
EEU-FR1A151
150uF 10V
C102, C202
Show 6 more
QtyPartRefs
1
MFR-25FBF52-1K
1k 1%
R1
1
MFR-25FBF52-4K7
4.7k 1%
R2
1
MFR-25FBF52-5K6
5.6k 1%
R5
3
MFR-25FBF52-100K
100k 1%
R6, R102, R202
3
MFR-25FBF52-10K
10k 1%
R7, R101, R201
1
PR01000101000FA100
100R 1W 1%
R8

Screen power hand.placed design files

The KiCad project lives in the tomassasovsky/segno-hardware repository on GitHub; these links point at the commit this page was built from.

Screen power hand.placed: common questions

How big is the Screen power hand.placed PCB?

The Screen power hand.placed measures 68 × 76 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Screen power hand.placed?

42 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Screen power hand.placed design files?

From the tomassasovsky/segno-hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Screen power hand.placed design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which tomassasovsky chose for the repository.

More boards in segno-hardware