Console.placed
tomassasovsky·segno-hardware·hardware/kicad/out_console/console.placed.kicad_pcb
About the Console.placed PCB
Console.placed is an open source Raspberry Pi PCB design by tomassasovsky, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 99.5 × 99.5 mm, with 77 components from 26 distinct parts.
Its main chip is the RaspberryPi_Pico_SMD_HandSolder, from the Raspberry Pi family. Other key parts include the DIP-14_W7.62mm and DIP-6_W7.62mm. By type, the board carries 29 resistors, 24 connectors, 16 capacitors, 6 diodes and 2 ICs.
From the project
Segno hardware: boards, sheet-metal enclosure, printed parts and decals
SKiDL scripts that emit KiCad netlists. One per board:
The ring carrier now uses white solder mask and black silkscreen for LED reflections. See ring order and assembly notes for the September 24 hole allowances, order settings and USB programming connection.
Current console CTRL headers J20/J21 connect T / R / S / RN to the Neutrik NJ6FD-V jacks; pin 4 uses ring-normal, leaving tip-normal and sleeve-normal open. This keeps the presence pull-down off the ADC tip. R11/R12 use the console Pico's +3V3PICO` supply so the AUX-powered ring UART remains biased high while the Pi is off. See the…
Main components on the Console.placed
Console.placed bill of materials (BOM)
77 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DIP-14_W7.62mm | DIP-14_W7.62mm | U1 |
| 1 | DIP-6_W7.62mm | DIP-6_W7.62mm | U2 |
| 1 | RaspberryPi_Pico_SMD_HandSolder | RaspberryPi_Pico_SMD_or_THT_Debug | J1 |
| 1 | IDC-Header_2x20_P2.54mm_Vertical | IDC-Header_2x20_P2.54mm_Vertical | J2 |
| 1 | JST_VH_B2P-VH_1x02_P3.96mm_Vertical | JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J3 |
| 2 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4, J23 |
| 14 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5, J8, J9, J10, J11, J12, J13, J14 +6 |
| 3 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J6, J20, J21 |
| 1 | PinHeader_2x03_P2.54mm_Vertical | PinHeader_2x03_P2.54mm_Vertical | J22 |
| 1 | JST_VH_B3P-VH_1x03_P3.96mm_Vertical | JST_VH_B3P-VH_1x03_P3.96mm_Vertical | J24 |
| 1 | D_DO-35_SOD27_P7.62mm_Horizontal | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 4 | SOT-23_Handsoldering | SOT-23_Handsoldering | D2, D4, D5, D6 |
| 1 | P6KE6.8CA SOT-23_Handsoldering | SOT-23_Handsoldering | D3 |
| 1 | K104K10X7RF53H5 C_Disc_D5.0mm_W2.5mm_P2.50mm | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 1 | EEU-FR1A221 C_Disc_D5.0mm_W2.5mm_P2.50mm | C_Disc_D5.0mm_W2.5mm_P2.50mm | C2 |
| 12 | C_Disc_D5.0mm_W2.5mm_P2.50mm | C_Disc_D5.0mm_W2.5mm_P2.50mm | C3, C4, C5, C6, C7, C8, C9, C10 +4 |
| 1 | CP_Radial_D10.0mm_P5.00mm | CP_Radial_D10.0mm_P5.00mm | C30 |
| 1 | CP_Radial_D6.3mm_P2.50mm | CP_Radial_D6.3mm_P2.50mm | C31 |
| 1 | MFR-25FBF52-4K7 R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 13 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R9, R10, R11, R12, R14, R16 +5 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MFR-25FBF52-5K6 R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | MFR-25FBF52-100K R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | MFR-25FBF52-10K R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | PR01000101000FA100 R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 6.8k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R18 |
| 10 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R23, R24, R25, R26, R27, R28, R29, R30 +2 |
Console.placed design files
The KiCad project lives in the tomassasovsky/segno-hardware repository on GitHub; these links point at the commit this page was built from.
Console.placed: common questions
What microcontroller does the Console.placed use?
The Console.placed is built around the RaspberryPi_Pico_SMD_HandSolder, from the Raspberry Pi family.
How big is the Console.placed PCB?
The Console.placed measures 99.5 × 99.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Console.placed?
77 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Console.placed design files?
From the tomassasovsky/segno-hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Console.placed design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which tomassasovsky chose for the repository.
Can I test firmware for the Console.placed without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
More boards in segno-hardware
Raspberry Pi
Segno console board
tomassasovsky
99.5 × 99.5 mm77 parts2LCERN-OHL-S-2.00Screen power hand
tomassasovsky
68 × 76 mm42 parts2LCERN-OHL-S-2.00Screen power hand.placed
tomassasovsky
68 × 76 mm42 parts2LCERN-OHL-S-2.00RP2040/RP2350
Segno pedal ring
tomassasovsky
80 × 80 mm18 parts2LCERN-OHL-S-2.00Segno led strip
tomassasovsky
16 × 8 mm4 parts2LCERN-OHL-S-2.00
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507