Segno console board

tomassasovsky·segno-hardware·hardware/kicad/out_console/segno_console_board.kicad_pcb

Segno console board layout, top view — open source Raspberry Pi board by tomassasovsky

About the Segno console board

Segno console board is an open source Raspberry Pi PCB design by tomassasovsky, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 99.5 × 99.5 mm, with 77 components from 26 distinct parts.

Its main chip is the RaspberryPi_Pico_SMD_HandSolder, from the Raspberry Pi family. Other key parts include the DIP-14_W7.62mm and DIP-6_W7.62mm. By type, the board carries 29 resistors, 24 connectors, 16 capacitors, 6 diodes and 2 ICs.

From the project

Segno hardware: boards, sheet-metal enclosure, printed parts and decals

SKiDL scripts that emit KiCad netlists. One per board:

The ring carrier now uses white solder mask and black silkscreen for LED reflections. See ring order and assembly notes for the September 24 hole allowances, order settings and USB programming connection.

Current console CTRL headers J20/J21 connect T / R / S / RN to the Neutrik NJ6FD-V jacks; pin 4 uses ring-normal, leaving tip-normal and sleeve-normal open. This keeps the presence pull-down off the ADC tip. R11/R12 use the console Pico's +3V3PICO` supply so the AUX-powered ring UART remains biased high while the Pi is off. See the…

Main components on the Segno console board

DIP-14_W7.62mmDIP-6_W7.62mm

Segno console board bill of materials (BOM)

77 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DIP-14_W7.62mm
U1
1
DIP-6_W7.62mm
U2
1
RaspberryPi_Pico_SMD_HandSolder
J1
1
IDC-Header_2x20_P2.54mm_Vertical
J2
1
JST_VH_B2P-VH_1x02_P3.96mm_Vertical
J3
2
JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical
J4, J23
14
JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical
J5, J8, J9, J10, J11, J12, J13, J14 +6
3
JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical
J6, J20, J21
1
PinHeader_2x03_P2.54mm_Vertical
J22
1
JST_VH_B3P-VH_1x03_P3.96mm_Vertical
J24
1
D_DO-35_SOD27_P7.62mm_Horizontal
D1
4
SOT-23_Handsoldering
D2, D4, D5, D6
1
P6KE6.8CA
SOT-23_Handsoldering
D3
1
K104K10X7RF53H5
C_Disc_D5.0mm_W2.5mm_P2.50mm
C1
1
EEU-FR1A221
C_Disc_D5.0mm_W2.5mm_P2.50mm
C2
12
C_Disc_D5.0mm_W2.5mm_P2.50mm
C3, C4, C5, C6, C7, C8, C9, C10 +4
1
CP_Radial_D10.0mm_P5.00mm
C30
1
CP_Radial_D6.3mm_P2.50mm
C31
1
MFR-25FBF52-4K7
R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal
R2
13
R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal
R3, R4, R9, R10, R11, R12, R14, R16 +5
Show 6 more
QtyPartRefs
1
MFR-25FBF52-5K6
R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal
R5
1
MFR-25FBF52-100K
R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal
R6
1
MFR-25FBF52-10K
R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal
R7
1
PR01000101000FA100
R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal
R8
1
6.8k
R18
10
R_1206_3216Metric_Pad1.30x1.75mm_HandSolder
R23, R24, R25, R26, R27, R28, R29, R30 +2

Segno console board design files

The KiCad project lives in the tomassasovsky/segno-hardware repository on GitHub; these links point at the commit this page was built from.

Segno console board: common questions

What microcontroller does the Segno console board use?

The Segno console board is built around the RaspberryPi_Pico_SMD_HandSolder, from the Raspberry Pi family.

How big is the Segno console board?

The Segno console board measures 99.5 × 99.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Segno console board?

77 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Segno console board design files?

From the tomassasovsky/segno-hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Segno console board design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which tomassasovsky chose for the repository.

Can I test firmware for the Segno console board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in segno-hardware

Similar boards