Segno pedal ring
tomassasovsky·segno-hardware·hardware/kicad/segno_pedal_ring.kicad_pcb
About the Segno pedal ring PCB
Segno pedal ring is an open source RP2040/RP2350 PCB design by tomassasovsky, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 80 × 80 mm, with 18 components from 16 distinct parts.
Its main chip is the XIAO-RP2350, from the RP2040/RP2350 family. Other key parts include the 74AHCT125N. By type, the board carries 5 capacitors, 5 resistors, 4 connectors, 2 ICs and 1 diode.
It belongs with the audio designs in this gallery.
From the project
Segno hardware: boards, sheet-metal enclosure, printed parts and decals
SKiDL scripts that emit KiCad netlists. One per board:
The ring carrier now uses white solder mask and black silkscreen for LED reflections. See ring order and assembly notes for the September 24 hole allowances, order settings and USB programming connection.
Current console CTRL headers J20/J21 connect T / R / S / RN to the Neutrik NJ6FD-V jacks; pin 4 uses ring-normal, leaving tip-normal and sleeve-normal open. This keeps the presence pull-down off the ADC tip. R11/R12 use the console Pico's +3V3PICO` supply so the AUX-powered ring UART remains biased high while the Pi is off. See the…
Main components on the Segno pedal ring
Segno pedal ring bill of materials (BOM)
18 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-RP2350 | XIAO_RP2350_SMD | U1 |
| 1 | 74AHCT125N | DIP-14_W7.62mm | U2 |
| 1 | Conn_01x04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | NEOPIXEL | WirePads_1x04 | J2 |
| 1 | RINGPINS24 | ModuleMountPads_Ring24 | J3 |
| 1 | RINGPINS16 | ModuleMountPads_4 | J4 |
| 1 | ACZ11BR1E-20FD1-20C | RotaryEncoder_SameSky_ACZ11BR1E-20FD1-20C | ENC1 |
| 1 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | K104K10X7RF53H5 470uF 16V low-ESR <=0.15R | CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | EEU-FR1A221 10nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 2 | 10nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C4 |
| 1 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C5 |
| 1 | MFR-25FBF52-1K 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | MFR-25FBF52-4K7 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 1 | MFR-25FBF52-5K6 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
Segno pedal ring design files
The KiCad project lives in the tomassasovsky/segno-hardware repository on GitHub; these links point at the commit this page was built from.
Segno pedal ring: common questions
What microcontroller does the Segno pedal ring use?
The Segno pedal ring is built around the XIAO-RP2350, from the RP2040/RP2350 family.
How big is the Segno pedal ring PCB?
The Segno pedal ring measures 80 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Segno pedal ring?
18 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Segno pedal ring design files?
From the tomassasovsky/segno-hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Segno pedal ring design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which tomassasovsky chose for the repository.
Can I test firmware for the Segno pedal ring without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in segno-hardware
Raspberry Pi
Segno console board
tomassasovsky
99.5 × 99.5 mm77 parts2LCERN-OHL-S-2.00Raspberry Pi
Console.placed
tomassasovsky
99.5 × 99.5 mm77 parts2LCERN-OHL-S-2.00Screen power hand
tomassasovsky
68 × 76 mm42 parts2LCERN-OHL-S-2.00Screen power hand.placed
tomassasovsky
68 × 76 mm42 parts2LCERN-OHL-S-2.00Segno led strip
tomassasovsky
16 × 8 mm4 parts2LCERN-OHL-S-2.00
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k