Brique

tommy-gilligan·brique·kicad/brique.kicad_pcb

Brique PCB layout, top view — open source RP2040/RP2350 board by tommy-gilligan

About the Brique PCB

Brique is an open source RP2040/RP2350 PCB design by tommy-gilligan, published on GitHub under the MIT license. It is a 4-layer board measuring 42.1 × 107.7 mm, with 84 components from 32 distinct parts.

Its main chip is the RP2354_80QFN, from the RP2040/RP2350 family. Other key parts include the TP5400, MAX16054 and MCP1825T. By type, the board carries 30 capacitors, 22 resistors, 10 diodes, 5 transistors, 4 ICs and 3 connectors.

From the project

An RP2350-based replacement mainboard for Nokia 3310. Rust firmware with browser-based simulator included.

Because the board would need to fit into the chassis of a Nokia 3310 and because there are existing doodads that would be sitting alongside the board anyways, scope has crept to include connecting to these other thingamajigs.

- Setting up board - Install Hardware Test Program - Reassemble 3310 - Manual Test

- give more control over display flushing, keep track of what needs updating, what needs flushing - display can do 90deg rotated addressing - allow setting time - rp2350 very low power state - make all system work live on primary core. give apps dedicated secondary core. - 'pre-emption'…

Brique, from the project README
From the project README

Main components on the Brique

Brique bill of materials (BOM)

84 components, 32 distinct parts.

QtyPartRefs
1
TP5400
U3
1
RP2354_80QFN
U5
1
MAX16054
U6
1
MCP1825T
U7
5
BC847
Q1, Q2, Q3, Q4, Q5
1
ABM8-272-T3
Y1
1
RV-3028-C7 32.768kHz 1ppm TA QC
RV-3028-C7_32.768kHz_1ppm_TA_QC
Y2
1
USB_B_Micro
J2
2
BM03B-SRSS-TB
J6, J7
1
EVQPUA02K
SW1
1
BOOT
SW2
3
TestPoint
TP1, TP2, TP3
1
D
D1
8
LED
D2, D3, D4, D5, D6, D7, D8, D9
1
SS34
D10
1
3.3u
L1
1
4.7uH
L2
1
BLM18EG471SN1D
L3
3
100nF
C1, C25, C29
2
15p
C3, C4
Show 12 more
QtyPartRefs
13
100nF
C5, C8, C11, C12, C13, C14, C15, C16 +5
4
4.7u
C6, C7, C9, C10
3
10u
C19, C23, C27
5
22uF
C22, C26, C28, C30, C32
6
10k
R1, R15, R16, R17, R37, R41
2
1K
R2, R34
1
33
R3
8
220
R4, R5, R6, R10, R11, R12, R13, R18
2
27
R7, R8
1
470
R14
1
3k
R35
1
120R
R40

Brique design files

The KiCad project lives in the tommy-gilligan/brique repository on GitHub; these links point at the commit this page was built from.

Brique: common questions

What microcontroller does the Brique use?

The Brique is built around the RP2354_80QFN, from the RP2040/RP2350 family.

How big is the Brique PCB?

The Brique measures 42.1 × 107.7 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Brique?

84 components, from 32 distinct parts. The full bill of materials is listed on this page.

Where can I download the Brique design files?

From the tommy-gilligan/brique repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Brique design in my own project?

Yes, under the terms of its MIT license, which tommy-gilligan chose for the repository.

Can I test firmware for the Brique without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards