6 open source boards using the MAX16054

Real designs built with the MAX16054, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the MAX16054

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the MAX16054 connects to, and the resistors, capacitors and other passives placed on it.

  • The CLEAR pin is tied to GND on 4 of 6 designs (a signal on 2).
  • The VCC pin has a decoupling capacitor on 3 of 6 designs, most often 22 µF (then 1 µF).
GNDpin 2Connected to: GND 100%
CLEARpin 3Connected to: GND 67% · a signal 33%
  • Resistor to GND on 33% · 100 kΩ (1), 3 kΩ (1)
VCCpin 6Connected to: VCC 83% · a signal 17%
  • Decoupling capacitor on 50% · 22 µF (6), 1 µF (1), 10 µF (1)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Xbox-PMS by Redherring32, Support Board by FoxCutter, Crazyflie control board by sPyOpenSource and Mvme buttress board by thorpej.

The MAX16054 in open source designs

The gallery holds 6 open source boards using the MAX16054 from 6 GitHub repositories; a typical one measures about 90 × 69 mm and carries around 71 components.

67% use four copper layers or more, and 83% carry an open source license.

The most starred is Xbox-PMS by Redherring32.

Microcontrollers on boards using the MAX16054

What boards using the MAX16054 are built for

MAX16054: common questions

Where can I find a MAX16054 reference design?

Each of the 6 boards on this page is a real design using the MAX16054. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MAX16054 CLEAR pin connected?

The CLEAR pin is tied to GND on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the MAX16054.

What decoupling capacitors do designs use on the MAX16054 VCC pin?

The VCC pin has a decoupling capacitor on 3 of 6 designs, most often 22 µF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the MAX16054.

Which microcontrollers do boards using the MAX16054 use?

Most are built on ESP32 (1) and RP2040/RP2350 (1).

How big is a typical board using the MAX16054?

The median is 90 × 69 mm, and 33% are two-layer designs.

What is the most popular open source board using the MAX16054?

By GitHub stars, Xbox-PMS by Redherring32, with 93 stars.

Can I simulate one of these boards using the MAX16054 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part