Dive

tomohiron907·Dive·hardware/Dive.kicad_pcb

Dive PCB layout, top view — open source Nordic nRF board by tomohiron907

About the Dive PCB

Dive is an open source Nordic nRF PCB design by tomohiron907, published on GitHub. It is a 2-layer board measuring 107 × 150 mm, with 86 components from 25 distinct parts.

Its main chip is the XIAO-nRF52840-Plus-SMD, from the Nordic nRF family. Other key parts include the MCP1700T-1802E/TT and PMW3610. By type, the board carries 31 switches, 24 diodes, 13 connectors, 11 capacitors, 4 ICs and 2 battery holders.

It belongs with the keyboards and iot & wireless designs in this gallery.

From the project

Split wireless keyboard with trackball (XIAO nRF52840, ZMK, KiCad)

Split wireless keyboard with a trackball (PMW3610), built on Seeed XIAO nRF52840 and ZMK.

GitHub Actions builds every target in firmware/zmk-config-dive/build.yaml on each push; download the firmware artifact from the Actions run.

Local build (macOS/Linux; first run downloads the Zephyr SDK into firmware/zmkws/):

The PCB references component models as ${KIPRJMOD}/3dmodels/.step (choc, mx, slide switches, XIAO nRF52840 Sense Plus). They are not included; put your own copies in hardware/3dmodels/` to see them in the 3D viewer.

Dive, from the project README
From the project README

Main components on the Dive

Dive bill of materials (BOM)

86 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
~
U1, U4
1
MCP1700T-1802E/TT
U2
1
PMW3610
U3
1
Conn_01x03_Socket
J1
1
Conn_01x03_Socket
J2
3
Conn_01x06_Socket
J3, J8, J12
3
Conn_01x03_Socket
J4, J5, J11
3
Conn_01x12_Pin
J6, J10, J13
2
Conn_01x04_Socket
J7, J9
2
Battery_Cell
BT1, BT2
24
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +16
2
SW_SPDT
SW25, SW29
1
RotaryEncoder
SW26
2
SW_SPDT_312
SW27, SW31
2
SW_Push
SW28, SW30
24
1N4148W
D1, D2, D3, D4, D5, D6, D7, D8 +16
2
1u
C1, C2
2
100N
100n
C3, C8
1
10N
10n
C4
1
100N
100n (X7R)
C5
Show 5 more
QtyPartRefs
1
C237435
10u (X7R)
C6
1
10N
10n (X7R)
C7
1
3.3U/25V
3.3u/25V
C9
2
105
C10, C11
1
2M
R1

Dive design files

The KiCad project lives in the tomohiron907/Dive repository on GitHub; these links point at the commit this page was built from.

Dive: common questions

What microcontroller does the Dive use?

The Dive is built around the XIAO-nRF52840-Plus-SMD, from the Nordic nRF family.

How big is the Dive PCB?

The Dive measures 107 × 150 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Dive?

86 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Dive design files?

From the tomohiron907/Dive repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Dive design in my own project?

The repository has no license, so all rights stay with tomohiron907. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Dive without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

Similar boards