13 open source boards using the PMW3610

Real designs built with the PMW3610, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the PMW3610

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the PMW3610 connects to, and the resistors, capacitors and other passives placed on it.

  • The +VCSEL pin has a capacitor to GND on 9 of 10 designs, most often 10 nF (then 4.7 µF).
  • The PASS_T pin has a capacitor to GND on 9 of 10 designs, most often 10 nF (then 4.7 µF).
  • The XYLASER pin is left unconnected on 10 of 10 designs.
  • The -VCSEL pin is left unconnected on 10 of 10 designs.
+VCSELpin 1Connected to: Signal 90%
  • Capacitor to GND on 90% · 10 nF (8), 4.7 µF (1)
NCpin 4Connected to: Not connected 100%
VDDIOpin 6Connected to: 3.3V 70% · a signal 30%
  • Decoupling capacitor on 70% · 100 nF (7), 4.7 µF (1)
NRESETpin 7Connected to: Signal 80% · not connected 20%
  • Pull-up to 3.3V on 70% · 10 kΩ (4), 2 MΩ (3)
VCPpin 9Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 80% · 10 nF (7), 10 µF (7), 4.7 µF (2)
PASS_Tpin 10Connected to: Signal 90%
  • Capacitor to GND on 90% · 10 nF (8), 4.7 µF (1)
GNDpin 11Connected to: GND 100%
CPpin 12Connected to: Signal 80% · not connected 20%
  • Series capacitor on 80% · 100 nF (7), 4.7 µF (1)
CNpin 13Connected to: Signal 80% · not connected 20%
  • Series capacitor on 80% · 100 nF (7), 4.7 µF (1)
VDDpin 14Connected to: 1.8V 80% · a signal 20%
  • Decoupling capacitor on 70% · 100 nF (7), 3.3 µF (5), 10 µF (2)
XYLASERpin 15Connected to: Not connected 100%
-VCSELpin 16Connected to: Not connected 100%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pmw3610 by sadekbaroudi, Pmw3610-pcb by siderakb, Dya panelized by cormoran and Pmw3610-pcb by badjeff.

The PMW3610 in open source designs

The gallery holds 13 open source boards using the PMW3610 from 11 GitHub repositories; a typical one measures about 34.9 × 41.3 mm and carries around 15 components.

85% are two-layer designs, the rest use four layers or more, and 54% carry an open source license.

The most starred is Pmw3610 by sadekbaroudi.

Microcontrollers on boards using the PMW3610

PMW3610: common questions

Where can I find a PMW3610 reference design?

Each of the 13 boards on this page is a real design using the PMW3610. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the PMW3610 +VCSEL pin connected?

The +VCSEL pin has a capacitor to GND on 9 of 10 designs, most often 10 nF (then 4.7 µF). Counted from the KiCad layouts of 10 open source designs using the PMW3610.

How is the PMW3610 PASS_T pin connected?

The PASS_T pin has a capacitor to GND on 9 of 10 designs, most often 10 nF (then 4.7 µF). Counted from the KiCad layouts of 10 open source designs using the PMW3610.

How is the PMW3610 XYLASER pin connected?

The XYLASER pin is left unconnected on 10 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the PMW3610.

What parts are used alongside the PMW3610?

The MCP1700x-180xxTT, TCR2EF19, TLV70018_SOT23-5 and TLV74318PDBVR appear in the most repositories here.

Which microcontrollers do boards using the PMW3610 use?

Most are built on Nordic nRF (3) and RP2040/RP2350 (2).

How big is a typical board using the PMW3610?

The median is 34.9 × 41.3 mm, and 85% are two-layer designs.

What is the most popular open source board using the PMW3610?

By GitHub stars, Pmw3610 by sadekbaroudi, with 220 stars.

Can I simulate one of these boards using the PMW3610 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part