12 open source boards using the STM32H723VGTx

Real designs built with the STM32H723VGTx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the STM32H723VGTx

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the STM32H723VGTx connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pins have a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 1 µF).
  • The NRST pin has a capacitor to GND on 10 of 10 designs, most often 100 nF.
  • The PH0 pin has a crystal on 9 of 10 designs, most often 25 MHz (then 16 MHz).
  • The PH0 pin has a capacitor to GND on 9 of 10 designs, most often 10 pF (then 12 pF).
PE2pin 1Connected to: Not connected 50% · a signal 50%
  • Series resistor on 30% · 1 kΩ (2), 330 Ω (1)
PE3pin 2Connected to: Not connected 70% · a signal 30%
PE6pin 5Connected to: Not connected 60% · a signal 40%
VBATpin 6Connected to: 3.3V 80%
  • Decoupling capacitor on 80% · 100 nF (17), 1 µF (2), 4.7 µF (1)
PC13pin 7Connected to: Not connected 60% · a signal 40%
PC14pin 8Connected to: Not connected 50% · a signal 50%
  • Capacitor to GND on 40% · 12 pF (1), 15 pF (1), 8 pF (1)
  • Crystal on 30% · 32.768 kHz (2)
PC15pin 9Connected to: Not connected 50% · a signal 50%
  • Capacitor to GND on 40% · 12 pF (1), 15 pF (1), 8 pF (1)
  • Crystal on 30% · 32.768 kHz (2)
VSSpin 10, 26, 49, 74, 99Connected to: GND 100%
VDDpin 11, 27, 50, 75, 100Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (67), 1 µF (8), 10 µF (3)
PH0pin 12Connected to: Signal 100%
  • Crystal on 90% · 25 MHz (3), 16 MHz (2), 24 MHz (2)
  • Capacitor to GND on 90% · 10 pF (2), 12 pF (1), 34 pF (1)
PH1pin 13Connected to: Signal 90%
  • Crystal on 80% · 25 MHz (3), 16 MHz (2), 24 MHz (1)
  • Capacitor to GND on 80% · 10 pF (1), 12 pF (1), 34 pF (1)
NRSTpin 14Connected to: A connector 50%
  • Capacitor to GND on 100% · 100 nF (9)
VSSApin 19Connected to: GND 100%
VREF+pin 20Connected to: 3.3V 80%
  • Decoupling capacitor on 80% · 100 nF (14), 1 µF (6), 4.7 µF (2)
VDDApin 21Connected to: 3.3V 70% · a signal 30%
  • Decoupling capacitor on 90% · 100 nF (16), 1 µF (7), 10 nF (2)
  • Ferrite bead on 50% · 1 kH (1)
PA0pin 22Connected to: A connector 40% · not connected 20%
  • Series resistor on 30% · 2.37 kΩ (1), 5.1 kΩ (1)
PA2pin 24Connected to: Not connected 60% · a signal 40%
PA3pin 25Connected to: Not connected 70% · a signal 30%
PB1pin 35Connected to: A connector 20% · not connected 40%
  • Series resistor on 30% · 10 kΩ (1), 330 Ω (1), 75 kΩ (1)
PB2pin 36Connected to: Not connected 60% · a signal 40%
PE15pin 45Connected to: Not connected 60% · a signal 40%
VCAPpin 48, 73Connected to: Signal 90%
  • Capacitor to GND on 90% · 2.2 µF (16), 100 nF (2)
PD10pin 57Connected to: Not connected 60% · a signal 40%
PD11pin 58Connected to: Not connected 70% · a signal 30%
PC9pin 66Connected to: A connector 50% · not connected 40%
  • Pull-up to 3.3V on 30% · 100 kΩ (1), 15 kΩ (1), 10 kΩ (1)
PA8pin 67Connected to: Not connected 60% · a signal 40%
PD3pin 84Connected to: Not connected 60% · a signal 40%
PD5pin 86Connected to: Not connected 60% · a signal 40%
PD6pin 87Connected to: Not connected 60% · a signal 40%
PB4(NJTRST)pin 90Connected to: Not connected 70% · a signal 30%
PB6pin 92Connected to: A connector 40% · not connected 30%
  • Pull-up to 3.3V on 30% · 4.7 kΩ (2), 1.2 kΩ (1)
PB7pin 93Connected to: A connector 40% · not connected 20%
  • Pull-up to 3.3V on 30% · 4.7 kΩ (2), 1.2 kΩ (1)
BOOT0pin 94Connected to: Signal 100%
  • Resistor to GND on 70% · 10 kΩ (5), 100 kΩ (1)
PE1pin 98Connected to: Not connected 70% · a signal 30%

57 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Control v4.1-stm32 by RoboJackets, Longboi by KungfuPancake, UltraHawk by InSynchronous and GuitarFX by nicholasshort.

The STM32H723VGTx in open source designs

The gallery holds 12 open source boards using the STM32H723VGTx from 10 GitHub repositories; a typical one measures about 71.3 × 67.5 mm and carries around 138 components.

75% use four copper layers or more, and 42% carry an open source license.

The most starred is Control v4.1-stm32 by RoboJackets.

Microcontrollers on boards using the STM32H723VGTx

What boards using the STM32H723VGTx are built for

STM32H723VGTx: common questions

Where can I find a STM32H723VGTx reference design?

Each of the 12 boards on this page is a real design using the STM32H723VGTx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32H723VGTx VDD pin?

The VDD pins have a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the STM32H723VGTx.

How is the STM32H723VGTx NRST pin connected?

The NRST pin has a capacitor to GND on 10 of 10 designs, most often 100 nF. Counted from the KiCad layouts of 10 open source designs using the STM32H723VGTx.

How is the STM32H723VGTx PH0 pin connected?

The PH0 pin has a crystal on 9 of 10 designs, most often 25 MHz (then 16 MHz). Counted from the KiCad layouts of 10 open source designs using the STM32H723VGTx.

Which microcontrollers do boards using the STM32H723VGTx use?

Most are built on STM32 (11) and ESP32 (1).

How big is a typical board using the STM32H723VGTx?

The median is 71.3 × 67.5 mm, and 25% are two-layer designs.

What is the most popular open source board using the STM32H723VGTx?

By GitHub stars, Control v4.1-stm32 by RoboJackets, with 32 stars.

Can I simulate one of these boards using the STM32H723VGTx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part