Motion Sense
tomrodinger·air_conditioner_energy_saver·PCB/V1/Motion_Sense.kicad_pcb
About the Motion Sense PCB
Motion Sense is an open source Nordic nRF PCB design by tomrodinger, published on GitHub. It is a 2-layer board measuring 70 × 25 mm, with 65 components from 50 distinct parts.
Its main chip is the E73-2G4M04S1B, from the Nordic nRF family. Other key parts include the IRM-H638T/TR2, PIR203A-S0, RS8032XK and HT7218. By type, the board carries 22 capacitors, 20 resistors, 5 ICs, 5 connectors, 4 inductors and 3 diodes.
From the project
This are all the open sources for a device that automatically controls your AC unit to turn it on or off
Main components on the Motion Sense
Motion Sense bill of materials (BOM)
65 components, 50 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IRM-H638T/TR2 | IRM-H638 | U1 |
| 1 | PIR203A-S0 | TO-52-3 | U2 |
| 1 | RS8032XK | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | E73-2G4M04S1B nRF52810-QCAA-R | QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm | U4 |
| 1 | HT7218 MCP1640T-I/CHY | SOT-23-6 | U5 |
| 1 | 32MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | 32.768KHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | PZ254V-11-05P Conn_01x05_Male | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | PZ254V-11-06P B+ | PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | B- | PinHeader_1x01_P2.54mm_Vertical | J3 |
| 2 | PZ254V-11-04P Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | J4, J5 |
| 1 | Antenna_Dipole | Texas_SWRA117D_2.4GHz_Right | AE1 |
| 1 | TS-1088-AR02016 SW_Push | SW_SPST_EVQPE1 | RST1 |
| 2 | TS-1088-AR02016 SW_Push | SW_SPST_EVQPE1 | SW1, SW2 |
| 1 | IR333-A | LED_D5.0mm | D1 |
| 1 | IR333-A | LED_D5.0mm | D2 |
| 1 | FM-B2020RGBA-HG LED_RGBA | FM-B2020RGBA-HG | D3 |
| 1 | 3.9nH | L_0402_1005Metric | L1 |
| 1 | SDCL1005C15NJTDF 15nH | L_0402_1005Metric | L2 |
| 1 | SDFL1608S100KTF 10uH | L_0603_1608Metric | L3 |
Show 30 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7uF | L_6.3x6.3_H3 | L4 |
| 2 | CL05B103KB5NNNC 10nF | C_0402_1005Metric | C1, C4 |
| 1 | CL10A475KO8NNNC 4.7uF | C_0603_1608Metric | C2 |
| 1 | CL31A226KAHNNNE 22uF | C_1206_3216Metric | C3 |
| 1 | RVT1A102M0810 47uF | C_1206_3216Metric | C5 |
| 4 | 12pF | C_0402_1005Metric | C6, C7, C20, C22 |
| 1 | 100pF | C_0402_1005Metric | C8 |
| 3 | CL31A106KBHNNNE 10uF | C_1206_3216Metric | C9, C12, C21 |
| 1 | NC | C_0402_1005Metric | C10 |
| 1 | 0.8pF | C_0402_1005Metric | C11 |
| 2 | 100nF | C_0402_1005Metric | C13, C17 |
| 1 | CC0603KRX7R9BB203 20nF | C_0402_1005Metric | C14 |
| 1 | CL21A475KAQNNNE 4.7uF | C_0805_2012Metric | C15 |
| 1 | CL10A105KB8NNNC 1uF | C_0603_1608Metric | C16 |
| 1 | CL05B104KB54PNC 100nF | C_0402_1005Metric | C18 |
| 1 | CL05B104KB54PNC 4.7uF | C_0805_2012Metric | C19 |
| 1 | 0402WGF4701TCE 100R | R_0603_1608Metric | R1 |
| 1 | 0603WAF4701T5E 100R | R_0603_1608Metric | R2 |
| 3 | 0402WGF1001TCE 1K | R_0402_1005Metric | R3, R4, R5 |
| 1 | 0402WGJ0133TCE 100R | R_0603_1608Metric | R6 |
| 1 | 0402WGF4702TCE 47K | R_0402_1005Metric | R7 |
| 4 | 0402WGF1002TCE 10K | R_0402_1005Metric | R8, R11, R23, R24 |
| 1 | RC0603FR-072M1L 2.1M | R_0402_1005Metric | R9 |
| 1 | RC0402FR-0730KL 30K | R_0402_1005Metric | R10 |
| 1 | 0402WGF4703TCE 33K | R_0402_1005Metric | R12 |
| 1 | 0402WGF3003TCE 22K | R_0402_1005Metric | R13 |
| 1 | 0402WGF1004TCE 1M | R_0402_1005Metric | R14 |
| 2 | 0402WGF0000TCE 10K | R_0402_1005Metric | R19, R22 |
| 1 | 976K | R_0402_1005Metric | R20 |
| 1 | 562K | R_0402_1005Metric | R21 |
Motion Sense design files
The KiCad project lives in the tomrodinger/air_conditioner_energy_saver repository on GitHub; these links point at the commit this page was built from.
Motion Sense: common questions
What microcontroller does the Motion Sense use?
The Motion Sense is built around the E73-2G4M04S1B, from the Nordic nRF family.
How big is the Motion Sense PCB?
The Motion Sense measures 70 × 25 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Motion Sense?
65 components, from 50 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Motion Sense design files?
From the tomrodinger/air_conditioner_energy_saver repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Motion Sense design in my own project?
The repository has no license, so all rights stay with tomrodinger. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Motion Sense without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
More boards in air_conditioner_energy_saver
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381