10 open source boards using the IRM-H638T/TR2
Real designs built with the IRM-H638T/TR2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
B-Sides 2024
OklahomaOpenSourceHardware
99.5 × 124.8 mm147 parts2LNo license3AVR/Arduino
Whisker
HeyPCB
64.6 × 55.2 mm112 parts4LCERN-OHL-S-2.00RP2040/RP2350
Intent2026
MichaelMIL
56 × 124 mm78 parts2LNo license0Nordic nRF
Motion Sense
tomrodinger
70 × 25 mm65 parts2LNo license0Boardoza IrDA Transceiver Infrared Wireless Communication Breakout Board
Boardoza
20 × 20 mm17 parts2LCC-BY-SA-4.00Air Conditioner Energy Saver V7
tomrodinger
81 × 38 mm60 parts2LNo license0Post route
Hive-RSI-Lab
110 × 40 mm36 parts2LMIT0Post route auto
Hive-RSI-Lab
110 × 40 mm36 parts2LMIT0Pre route
Hive-RSI-Lab
110 × 40 mm36 parts2LMIT0Ultra front
Hive-RSI-Lab
110 × 40 mm36 parts2LMIT0
How designs wire the IRM-H638T/TR2
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the IRM-H638T/TR2 connects to, and the resistors, capacitors and other passives placed on it.
- The VS pin has a capacitor to GND on 4 of 6 designs, most often 4.7 µF (then 1 µF).
- The VS pin has a pull-up to 3.3V on 3 of 6 designs, most often 100 Ω (then 3.3 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 2 | Connected to: GND 83% · a signal 17% | — |
| OUTpin 3 | Connected to: A connector 50%, the microcontroller 33% |
|
| VSpin 4 | Connected to: Signal 83% · 5V 17% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include B-Sides 2024 by OklahomaOpenSourceHardware, Boardoza IrDA Transceiver Infrared Wireless Communication Breakout Board by Boardoza, Whisker by HeyPCB and Post route by Hive-RSI-Lab.
The IRM-H638T/TR2 in open source designs
The gallery holds 10 open source boards using the IRM-H638T/TR2 from 6 GitHub repositories; a typical one measures about 90.3 × 40 mm and carries around 48 components.
90% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is B-Sides 2024 by OklahomaOpenSourceHardware.
Parts used alongside the IRM-H638T/TR2
Microcontrollers on boards using the IRM-H638T/TR2
What boards using the IRM-H638T/TR2 are built for
IRM-H638T/TR2: common questions
Where can I find a IRM-H638T/TR2 reference design?
Each of the 10 boards on this page is a real design using the IRM-H638T/TR2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the IRM-H638T/TR2 VS pin connected?
The VS pin has a capacitor to GND on 4 of 6 designs, most often 4.7 µF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the IRM-H638T/TR2.
Which microcontrollers do boards using the IRM-H638T/TR2 use?
Most are built on RP2040/RP2350 (2), AVR/Arduino (1) and Nordic nRF (1).
How big is a typical board using the IRM-H638T/TR2?
The median is 90.3 × 40 mm, and 90% are two-layer designs.
What is the most popular open source board using the IRM-H638T/TR2?
By GitHub stars, B-Sides 2024 by OklahomaOpenSourceHardware, with 3 stars.
Can I simulate one of these boards using the IRM-H638T/TR2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.