XpressoSmoothie
TopherMan·XpressoSmoothie
About the XpressoSmoothie PCB
XpressoSmoothie is an open source PCB design by TopherMan, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 99.7 × 99.7 mm, with 127 components from 40 distinct parts.
Other key parts include the POLOLU_A4988, LM7809CT, TC4422A and LM1117-3.3. By type, the board carries 32 resistors, 30 connectors, 24 capacitors, 14 diodes, 11 ICs and 4 transistors.
It belongs with the robotics & motion designs in this gallery.
From the project
A Smoothie-compatible board with a modular design.
Overview ======== This is a plan to make a RepRap electronics solution capable of running the Smoothie firmware. The board will be built around the LPCXpresso 1769, with a more modular design in the spirit of RAMPS. More information about the RepRap project can be found at http://reprap.org, and more information about Smoothie can be found at http://smoothieware.org.
Main components on the XpressoSmoothie
XpressoSmoothie bill of materials (BOM)
127 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | POLOLU_A4988 | POLOLU | U1, U2, U3, U4, U5 |
| 1 | LM7809CT | TO220_VERT_1117 | U7 |
| 4 | TC4422A | SO8N | U8, U9, U10, U11 |
| 1 | LM1117-3.3 | TO220_VERT_1117 | U12 |
| 4 | IRLB 8743 | TO220_VERT_C | Q1, Q2, Q3, Q4 |
| 9 | HEADER_4 | PIN_ARRAY_4x1 | J1, J2, J7, J8, J12, J15, J27, J29 +1 |
| 7 | HEADER_3 | PIN_ARRAY_3X1 | J3, J16, J17, J18, J23, J24, J25 |
| 5 | HEADER_3X2 | pin_array_3x2 | J4, J5, J9, J10, J14 |
| 1 | LPCXPRESSO_1769_HEADER | LPCXPRESS0_1769 | J6 |
| 1 | Pwr_in | bornier4 | J11 |
| 1 | HEADER_6 | pin_array_3x2 | J13 |
| 4 | HEADER_2 | bornier2 | J19, J20, J21, J22 |
| 1 | USB | USB_MICRO_RMC_noedge | J26 |
| 1 | MICROSD-MOLEX | microsd-molex-47309 | J28 |
| 2 | FUSE | FUSE-MINI-AUTO | F1, F2 |
| 4 | CONN_1 | 1pin | Hole1, Hole2, Hole3, Hole4 |
| 3 | SW_PUSH | SW_PUSH_SMALL | SW1, SW2, SW3 |
| 3 | CONN_2 | PIN_ARRAY_2X1 | Th0, Th1, Th2 |
| 4 | 1N4007 | DO-41 | D1, D2, D7, D8 |
| 1 | POWER_1 | LED-0805 | D3 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | POWER_2 | LED-0805 | D4 |
| 1 | POWER_3 | LED-0805 | D5 |
| 1 | POWER_4 | LED-0805 | D6 |
| 1 | LED4 | LED-0805 | D9 |
| 1 | V_GATES | LED-0805 | D11 |
| 1 | 3V3 | LED-0805 | D12 |
| 1 | LED2 | LED-0805 | D13 |
| 1 | LED3 | LED-0805 | D14 |
| 1 | LED1 | LED-0805 | D15 |
| 7 | 100u | c_elec_6.3x7.7 | C1, C2, C3, C4, C12, C13, C14 |
| 6 | 1u/50v | SM1206 | C5, C6, C7, C8, C23, C24 |
| 3 | 10u | c_elec_4x5.3 | C9, C10, C11 |
| 7 | 220n | SM0805 | C15, C16, C17, C18, C19, C20, C21 |
| 1 | 1u | SM1206 | C22 |
| 8 | 4k7 | SM0805 | R1, R2, R5, R6, R10, R11, R12, R13 |
| 5 | 1k | SM0805 | R3, R4, R8, R9, R14 |
| 10 | 100 | SM0805 | R7, R15, R16, R17, R20, R22, R24, R25 +2 |
| 4 | 1k8 | SM0805 | R18, R19, R21, R23 |
| 4 | 10k | SM0805 | R27, R28, R31, R32 |
| 1 | 680 | SM0805 | R29 |
XpressoSmoothie design files
The KiCad project lives in the TopherMan/XpressoSmoothie repository on GitHub; these links point at the commit this page was built from.
XpressoSmoothie: common questions
How big is the XpressoSmoothie PCB?
The XpressoSmoothie measures 99.7 × 99.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the XpressoSmoothie?
127 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the XpressoSmoothie design files?
From the TopherMan/XpressoSmoothie repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the XpressoSmoothie design in my own project?
Yes, under the terms of its GPL-3.0 license, which TopherMan chose for the repository.
More boards in XpressoSmoothie
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979