5 open source boards using the LM7809CT

Real designs built with the LM7809CT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the LM7809CT

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LM7809CT connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 is tied to VIN_RMOT on 3 of 5 designs (a signal on 2).
  • Pin 2 is tied to GND on 3 of 5 designs.
  • Pin 1 has a decoupling capacitor on 2 of 5 designs, most often 330 nF (then 100 µF).
  • Pin 3 has a capacitor to GND on 2 of 5 designs, most often 1 µF (then 220 nF).
Pin 1Connected to: VIN_RMOT 60% · a signal 40%
  • Decoupling capacitor on 40% · 330 nF (1), 100 µF (1)
Pin 2Connected to: GND 60% · -4.5V 20% · a signal 20%
Pin 3Connected to: Signal 60% · 9V 40%
  • Capacitor to GND on 40% · 1 µF (4), 220 nF (1), 100 µF (1)
  • Series resistor on 40% · 820 Ω (1), 390 kΩ (1), 1 MΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Esr meter rev a by 4x1md, XpressoSmoothie by TopherMan, AVRForth by oco2000 and Gclass amplifier by nachocarballeda.

The LM7809CT in open source designs

The gallery holds 5 open source boards using the LM7809CT from 5 GitHub repositories; a typical one measures about 99.7 × 99.7 mm and carries around 69 components.

100% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is Esr meter rev a by 4x1md.

Microcontrollers on boards using the LM7809CT

What boards using the LM7809CT are built for

LM7809CT: common questions

Where can I find a LM7809CT reference design?

Each of the 5 boards on this page is a real design using the LM7809CT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LM7809CT pin 1 connected?

Pin 1 is tied to VIN_RMOT on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the LM7809CT.

How is the LM7809CT pin 2 connected?

Pin 2 is tied to GND on 3 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the LM7809CT.

How is the LM7809CT pin 3 connected?

Pin 3 has a capacitor to GND on 2 of 5 designs, most often 1 µF (then 220 nF). Counted from the KiCad layouts of 5 open source designs using the LM7809CT.

Which microcontrollers do boards using the LM7809CT use?

Most are built on AVR/Arduino (2).

How big is a typical board using the LM7809CT?

The median is 99.7 × 99.7 mm, and 100% are two-layer designs.

What is the most popular open source board using the LM7809CT?

By GitHub stars, Esr meter rev a by 4x1md, with 14 stars.

Can I simulate one of these boards using the LM7809CT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part