Super duper keyboard
toulounmarios·super-duper-keyboard·KiCAD_files/final.kicad_pcb
About the Super duper keyboard PCB
Super duper keyboard is an open source Nordic nRF PCB design by toulounmarios, published on GitHub. It is a 4-layer board measuring 282.8 × 93.1 mm, with 90 components from 5 distinct parts.
Its main chip is the XIAO-nRF52840-SMD, from the Nordic nRF family. By type, the board carries 42 switches, 42 diodes, 4 resistors and 2 ICs.
It belongs with the keyboards designs in this gallery.
From the project
this my super duper keyboard that im building. its a split keyboard based on the corne layout, that uses kailh choc v2 deep sea silent swiches so that i can use it at night while my family is sleeping. this is my first time both designing a pcb but also using a split keyboard, so im excited for both lol
helloooooooooooooooooooooo, if you are reading this then you are at the readme section of this repo, so pretty am i right? i know, i know. im building this project so that i can FINALLY step away from using an old 25 euro gaming keyboard with blue switches ( VERY LOUD ) and make a compact and aesthetic split keyboad that looks and sounds nice, while also not waking up my entire family at 3am while playing ultrakill or Apex Legends ( both goated btw). anyways, for anyone who is suprisingly interested in my project here are the key components of the build as well as my key take aways from my…

Main components on the Super duper keyboard
Super duper keyboard bill of materials (BOM)
90 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | XIAO-nRF52840-SMD | modified-XIAO-nRF52840-SMD | U1, U2 |
| 42 | SW_Push | SW_choc_v2_HS_CPG135001S30_1u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +34 |
| 42 | D | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +34 |
| 2 | 806k | R_0805_2012Metric | R1, R3 |
| 2 | 2M | R_0805_2012Metric | R2, R4 |
Super duper keyboard design files
The KiCad project lives in the toulounmarios/super-duper-keyboard repository on GitHub; these links point at the commit this page was built from.
Super duper keyboard: common questions
What microcontroller does the Super duper keyboard use?
The Super duper keyboard is built around the XIAO-nRF52840-SMD, from the Nordic nRF family.
How big is the Super duper keyboard PCB?
The Super duper keyboard measures 282.8 × 93.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Super duper keyboard?
90 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Super duper keyboard design files?
From the toulounmarios/super-duper-keyboard repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Super duper keyboard design in my own project?
The repository has no license, so all rights stay with toulounmarios. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Super duper keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381