AeroBlinker

toyJig·AeroBlinker

AeroBlinker PCB layout, top view — open source STM32 board by toyJig

About the AeroBlinker PCB

AeroBlinker is an open source STM32 PCB design by toyJig, published on GitHub. It is a 2-layer board measuring 38.3 × 26.8 mm, with 28 components from 21 distinct parts.

Its main chip is the STM32F042F6P6, from the STM32 family. Other key parts include the USBLC6-2SC6, TPS62162DSGR and XC6206P332MR. By type, the board carries 7 capacitors, 6 connectors, 6 resistors, 4 ICs, 2 diodes and 1 transistor.

From the project

Custom PCB w/ KiCAD that reads Receiver Signals to control light flash patterns - Aeronautics Team

AeroBlinker, from the project README
From the project README

Main components on the AeroBlinker

AeroBlinker bill of materials (BOM)

28 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F042F6P6
U1
1
USBLC6-2SC6
U2
1
TPS62162DSGR
U3
1
XC6206P332MR
U5
1
AO3400A
Q1
3
C158012
LED_GND
J1, J2, J3
1
C160315
BATT
J4
1
C158012
RECEIVER
J5
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J6
1
SW_Push
SW1
1
B5819W_SL
D1
1
MM5Z3V3
B5819W_SL
D2
1
2.2U
2.2u
L1
3
100N
100n
C1, C4, C6
1
10U
10u
C2
1
100n
C5
2
22U
22u
C7, C9
2
10K
R1, R4
2
5K1
R2, R3
1
100K
R5
Show 1 more
QtyPartRefs
1
1K
R6

AeroBlinker design files

The KiCad project lives in the toyJig/AeroBlinker repository on GitHub; these links point at the commit this page was built from.

AeroBlinker: common questions

What microcontroller does the AeroBlinker use?

The AeroBlinker is built around the STM32F042F6P6, from the STM32 family.

How big is the AeroBlinker PCB?

The AeroBlinker measures 38.3 × 26.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AeroBlinker?

28 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the AeroBlinker design files?

From the toyJig/AeroBlinker repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the AeroBlinker design in my own project?

The repository has no license, so all rights stay with toyJig. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the AeroBlinker without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards