TrailCurrentAirQualityModule
trailcurrentoss·TrailCurrentAirQualityModule·EDA/TrailCurrentAirQualityModule/TrailCurrentAirQualityModule.kicad_pcb
About the TrailCurrentAirQualityModule PCB
TrailCurrentAirQualityModule is an open source ESP32 PCB design by trailcurrentoss, published on GitHub under the MIT license. It is a 2-layer board measuring 58.7 × 64.2 mm, with 8 components from 8 distinct parts.
Its main chip is the ESP32-C6-Super-Mini, from the ESP32 family. Other key parts include the Amazon Buck Converter and SN65HVD230. By type, the board carries 3 ICs, 2 connectors, 2 resistors and 1 capacitor.
It belongs with the sensors and iot & wireless designs in this gallery.
From the project
Environmental monitoring module with temperature, humidity, and air quality sensors over CAN bus
Air quality sensor module for monitoring environmental conditions including temperature, humidity, and air quality metrics. Part of the TrailCurrent open-source vehicle platform.
- Function: Environmental monitoring module combining temperature, humidity, and air quality sensing - Key Features: - DHT22 temperature and humidity sensor - Air quality sensing capability - Compact design suitable for integration into larger systems - PlatformIO-based firmware for configuration and operation
Main components on the TrailCurrentAirQualityModule
TrailCurrentAirQualityModule bill of materials (BOM)
8 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Amazon Buck Converter | AmazonBuckConverter | U1 |
| 1 | ESP32-C6-Super-Mini | ESP32-C6-Super-Mini | U2 |
| 1 | SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | DHT22 | DHT22_Module | J1 |
| 1 | S4B-XH-SM4-TB | JST_S4B-XH-SM4-TB | J3 |
| 1 | 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 4.7K | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | R2 |
TrailCurrentAirQualityModule design files
The KiCad project lives in the trailcurrentoss/TrailCurrentAirQualityModule repository on GitHub; these links point at the commit this page was built from.
TrailCurrentAirQualityModule: common questions
What microcontroller does the TrailCurrentAirQualityModule use?
The TrailCurrentAirQualityModule is built around the ESP32-C6-Super-Mini, from the ESP32 family.
How big is the TrailCurrentAirQualityModule PCB?
The TrailCurrentAirQualityModule measures 58.7 × 64.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TrailCurrentAirQualityModule?
8 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the TrailCurrentAirQualityModule design files?
From the trailcurrentoss/TrailCurrentAirQualityModule repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TrailCurrentAirQualityModule design in my own project?
Yes, under the terms of its MIT license, which trailcurrentoss chose for the repository.
Can I test firmware for the TrailCurrentAirQualityModule without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k