Lechess
trandongtruclam·lechess·board/board.kicad_pcb
About the Lechess PCB
Lechess is an open source Raspberry Pi PCB design by trandongtruclam, published on GitHub. It is a 2-layer board measuring 195 × 160 mm, with 216 components from 15 distinct parts.
Its main chip is the RPi_GPIO, from the Raspberry Pi family. Other key parts include the 74HC238, 74LS151 and A3144. By type, the board carries 66 ICs, 66 diodes, 65 capacitors, 11 resistors, 4 switches and 2 connectors.
From the project
an early prototyping for smart chess board.
Login: Allows users to log in to the app using their credentials (e.g., email and password). The app sends a request to the NodeJS server, which authenticates the user and provides a JWT token. Register: Allows new users to create an account. The account data (username, email, password, etc.) is stored in the NodeJS server and MongoDB. Logout: Allows users to log out of the app, clearing their session data. Password Reset: Enables users to reset their password via email or SMS by sending a request to the NodeJS server.

Main components on the Lechess
Lechess bill of materials (BOM)
216 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC238 | DIP-16_W7.62mm | U1 |
| 1 | 74LS151 | DIP-16_W7.62mm | U2 |
| 64 | A3144 | TO-92Flat | U3, U4, U5, U6, U7, U8, U9, U10 +56 |
| 1 | Conn_01x02_Female | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | RPi_GPIO | raspberry_pi_socket | J3 |
| 1 | Buzzer | MagneticBuzzer_ProSignal_ABT-410-RC | BZ1 |
| 4 | SW_Push | SW_PUSH_6mm_H5mm | SW1, SW2, SW3, SW4 |
| 1 | Conn_02x05_Odd_Even | PinSocket_2x05_P2.54mm_Vertical | e1 |
| 2 | LED | LED_D5.0mm | D1, D2 |
| 64 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D3, D4, D5, D6, D7, D8, D9, D10 +56 |
| 1 | 2.2uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 64 | 0.1uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C3, C4, C5, C6, C7, C8, C9 +56 |
| 1 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 2 | 2.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
| 8 | 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R5, R6, R7, R8, R9, R10, R11 |
Lechess design files
The KiCad project lives in the trandongtruclam/lechess repository on GitHub; these links point at the commit this page was built from.
- Layoutboard/board.kicad_pcb
- Schematicboard/board.kicad_sch
Lechess: common questions
What microcontroller does the Lechess use?
The Lechess is built around the RPi_GPIO, from the Raspberry Pi family.
How big is the Lechess PCB?
The Lechess measures 195 × 160 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lechess?
216 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Lechess design files?
From the trandongtruclam/lechess repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Lechess design in my own project?
The repository has no license, so all rights stay with trandongtruclam. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Lechess without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507