12 open source boards using the A3144
Real designs built with the A3144, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
RD40 display V1
lhm0
120 × 120 mm32 parts2LCC-BY-NC-4.071Raspberry Pi
Smart-Chessboard
InputBlackBoxOutput
195 × 160 mm216 parts2LNo license4Sensors+LEDs
aaronluebbert
57.1 × 456.8 mm41 parts2LNo license1Raspberry Pi
Lechess
trandongtruclam
195 × 160 mm216 parts2LNo license0ESP32
Compostaje
dani0421
100 × 100 mm103 parts2LNo license0AVR/Arduino
LED DisplayV2
Aitthikit
120 × 120 mm101 parts4LNo license0MicroSwitch-SD-E
JuergenLeber
7.7 × 10 mm4 parts2LNo license0Cerradura
AndyPecotche
90 × 143.5 mm22 parts2LBSD-3-Clause0Cerradura
AndyPecotche
90 × 143.5 mm22 parts2LNo license0Seedling Imager hall sensor board
sybednar
14.3 × 16.2 mm3 parts2LMIT0AVR/Arduino
Revopod1
tongtongwang86
60 × 37 mm53 parts4LCC-BY-NC-4.05AVR/Arduino
Baja Speedometer
UofA-BAJA
104.4 × 46.4 mm23 parts2LNo license6
How designs wire the A3144
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the A3144 connects to, and the resistors, capacitors and other passives placed on it.
- The PIN_3 pin has a pull-up to 5V on 5 of 12 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PIN_3pin 3 | Connected to: The microcontroller 25% · 5V 17% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RD40 display V1 by lhm0, Baja Speedometer by UofA-BAJA, Revopod1 by tongtongwang86 and Smart-Chessboard by InputBlackBoxOutput.
The A3144 in open source designs
The gallery holds 12 open source boards using the A3144 from 12 GitHub repositories; a typical one measures about 95 × 120 mm and carries around 37 components.
83% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is RD40 display V1 by lhm0.
Parts used alongside the A3144
Microcontrollers on boards using the A3144
What boards using the A3144 are built for
A3144: common questions
Where can I find a A3144 reference design?
Each of the 12 boards on this page is a real design using the A3144. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the A3144 PIN_3 pin?
The PIN_3 pin has a pull-up to 5V on 5 of 12 designs, most often 10 kΩ. Counted from the KiCad layouts of 12 open source designs using the A3144.
What parts are used alongside the A3144?
The 74HC238, 74LS151 and AMS1117-5.0 appear in the most repositories here.
Which microcontrollers do boards using the A3144 use?
Most are built on AVR/Arduino (4), Raspberry Pi (2) and ESP32 (1).
How big is a typical board using the A3144?
The median is 95 × 120 mm, and 83% are two-layer designs.
What is the most popular open source board using the A3144?
By GitHub stars, RD40 display V1 by lhm0, with 71 stars.
Can I simulate one of these boards using the A3144 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.