20 open source boards using the 74LS151
Real designs built with the 74LS151, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Space Odyssey
jotego
49.6 × 78.3 mm22 parts2LGPL-3.0335Apple-II-R0
reifsnyderb
215.5 × 361.2 mm189 parts2LNo license26MyCpu
fortinsylvain
194.5 × 188.6 mm156 parts4LMIT18Raspberry Pi
Smart-Chessboard
InputBlackBoxOutput
195 × 160 mm216 parts2LNo license4VIO MPF I
electrickery
156 × 100.1 mm63 parts2LNo license4Cpuexperiment
fjalvingh
160 × 100 mm78 parts2LGPL-2.03Lomax ColorMagic Redux
RichCini
254 × 137.7 mm148 parts4LNo license1Space Odyssey
ericlewis
49.6 × 78.3 mm22 parts2LGPL-3.01Raspberry Pi
Lechess
trandongtruclam
195 × 160 mm216 parts2LNo license0Clock circuit
bit4man
145.4 × 95.5 mm63 parts2LNo license0Aniol64
vampirehunt2
160.3 × 74.8 mm54 parts2LNo license0MUX8x1-v5
TheJustMoose
99.1 × 99.1 mm47 parts4LNo license2Aniol32
vampirehunt2
160.3 × 74.8 mm54 parts2LNo license0MUX8x1-100x150-r2
TheJustMoose
160 × 99.1 mm44 parts2LNo license2Aniol640
vampirehunt2
160.3 × 74.8 mm54 parts2LNo license0Stack DIP
charlespax
14 × 30.1 mm17 parts2LMIT0KeyboardScanner
stefanhepp
150 × 100 mm32 parts2LCC-BY-SA-4.00MUX
TheJustMoose
152.4 × 152.4 mm38 parts2LNo license2CPU09US4
roberto314
160 × 100 mm68 parts2LNo license1AVR/Arduino
Panel-MainControl
stefanhepp
142.1 × 72.1 mm22 parts2LCC-BY-SA-4.00
How designs wire the 74LS151
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the 74LS151 connects to, and the resistors, capacitors and other passives placed on it.
- The E pin is tied to GND on 10 of 14 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Epin 7 | Connected to: GND 71% · a signal 21% | — |
| GNDpin 8 | Connected to: GND 100% | — |
| VCCpin 16 | Connected to: 5V 100% | — |
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Space Odyssey by jotego, Apple-II-R0 by reifsnyderb, MyCpu by fortinsylvain and VIO MPF I by electrickery.
The 74LS151 in open source designs
The gallery holds 20 open source boards using the 74LS151 from 15 GitHub repositories; a typical one measures about 160 × 99.5 mm and carries around 54 components.
85% are two-layer designs, the rest use four layers or more, and 35% carry an open source license.
The most starred is Space Odyssey by jotego.
Parts used alongside the 74LS151
Microcontrollers on boards using the 74LS151
What boards using the 74LS151 are built for
74LS151: common questions
Where can I find a 74LS151 reference design?
Each of the 20 boards on this page is a real design using the 74LS151. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74LS151 E pin connected?
The E pin is tied to GND on 10 of 14 designs (a signal on 3). Counted from the KiCad layouts of 14 open source designs using the 74LS151.
What parts are used alongside the 74LS151?
The 74LS00, 74LS04, 74LS08, 74LS32 and 74LS74 appear in the most repositories here.
Which microcontrollers do boards using the 74LS151 use?
Most are built on Raspberry Pi (2) and AVR/Arduino (1).
How big is a typical board using the 74LS151?
The median is 160 × 99.5 mm, and 85% are two-layer designs.
What is the most popular open source board using the 74LS151?
By GitHub stars, Space Odyssey by jotego, with 335 stars.
Can I simulate one of these boards using the 74LS151 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.