HardLabs

Easy RC Tx V1.2

TRD-B·EasyRC·PCBs/EasyRC Tx/KiCAD files/Easy RC Tx V1.2.kicad_pcb

Easy RC Tx V1.2 PCB layout, top view — open source ESP32 board by TRD-B

About the Easy RC Tx V1.2 PCB

Easy RC Tx V1.2 is an open source ESP32 PCB design by TRD-B, published on GitHub under the MIT license. It is a 2-layer board measuring 29 × 76 mm, with 11 components from 10 distinct parts.

Its main chip is the Seeedstudio Xiao ESP32 C3, from the ESP32 family. By type, the board carries 5 resistors, 2 connectors, 1 IC, 1 transistor, 1 switch and 1 diode.

It belongs with the robotics & motion, iot & wireless and power & battery designs in this gallery.

From the project

Open source RC platform

Description --- EasyRC is an easy-to-build platform for creating your own remote-controlled vehicle. The platform includes CAD files for printing an affordable 1:16 scale car as well as a small remote control. Further, it includes the project and production files for the printed circuit boards that are needed to power these devices. Last but not least, it lists all required components in a bill of materials and comes with a complete instruction manual that shows how to print, solder, assemble, program, and adjust everything for running the car. The legacy folder contains data and information…

Easy RC Tx V1.2, from the project README
From the project README

Main components on the Easy RC Tx V1.2

Seeedstudio Xiao ESP32 C3

Easy RC Tx V1.2 bill of materials (BOM)

11 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Seeedstudio Xiao ESP32 C3
U1
1
IRLU024
Q1
1
~
J1
1
Conn_01x04
J2
1
SW_DPDT_x2
SW1
1
LED
D1
2
33kOhm
R1, R2
1
10kOhm
R3
1
100kOhm
R4
1
330Ohm
R5

Easy RC Tx V1.2 design files

The KiCad project lives in the TRD-B/EasyRC repository on GitHub; these links point at the commit this page was built from.

Easy RC Tx V1.2: common questions

What microcontroller does the Easy RC Tx V1.2 use?

The Easy RC Tx V1.2 is built around the Seeedstudio Xiao ESP32 C3, from the ESP32 family.

How big is the Easy RC Tx V1.2 PCB?

The Easy RC Tx V1.2 measures 29 × 76 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Easy RC Tx V1.2?

11 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Easy RC Tx V1.2 design files?

From the TRD-B/EasyRC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Easy RC Tx V1.2 design in my own project?

Yes, under the terms of its MIT license, which TRD-B chose for the repository.

Can I test firmware for the Easy RC Tx V1.2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in EasyRC

Similar boards