Esp8266-hw
tridung141196·esp8266-hw
About the Esp8266-hw PCB
Esp8266-hw is an open source ESP8266 PCB design by tridung141196, published on GitHub. It is a 2-layer board measuring 47.2 × 25.7 mm, with 48 components from 25 distinct parts.
Its main chip is the chip-esp8266, from the ESP8266 family. Other key parts include the usb_mini_b, CP2102, 25Q32 and AMS1117-3.3. By type, the board carries 17 resistors, 14 capacitors, 5 ICs, 3 diodes, 2 transistors and 2 connectors.
It belongs with the iot & wireless designs in this gallery.
From the project
ESP8266 IOTMAKERVN: - Size: 1.86x1 inch. - Intergrate micro USB. - Input Voltage: 5v (Vusb). - Open hardware with CC-BY-SA license. - Design with KiCad.
ESP8266 IOTMAKERVN: - Size: 1.86x1 inch. - Intergrate micro USB. - Input Voltage: 5v (Vusb). - Open hardware with CC-BY-SA license. - Design with KiCad.
This project was in development phase - we will remove this remark after release

Main components on the Esp8266-hw
Esp8266-hw bill of materials (BOM)
48 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | usb_mini_b | USB_Micro-B | U1 |
| 1 | chip-esp8266 | esp8266ex | U2 |
| 1 | CP2102 | cp2102 | U3 |
| 1 | 25Q32 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U4 |
| 1 | AMS1117-3.3 | SOT-223 | U6 |
| 2 | S8050 | SOT-23_standar | Q1, Q2 |
| 1 | 26MHz | Crystal_SMD_5032-4pin_5.0x3.2mm | Y1 |
| 2 | CONN_01X10 | Pin_Header_Straight_1x10_Pitch2.54mm | J1, J2 |
| 2 | SW_Push | nut_nhan_ngang | SW1, SW2 |
| 2 | LED | LED_0603 | D1, D8 |
| 1 | 1n5819 | D_SOD-123 | D5 |
| 2 | L | L_0603 | L1, L2 |
| 3 | 10uF | C_0603 | C1, C6, C9 |
| 1 | 5.6pF | C_0603 | C2 |
| 5 | 100NF | C_0603 | C3, C8, C10, C11, C13 |
| 1 | 1uF | C_0603 | C4 |
| 2 | 10pF | C_0603 | C5, C7 |
| 2 | 10uF TANT | C_1206 | C12, C15 |
| 7 | 10K | R_0603 | R1, R2, R4, R5, R6, R7, R8 |
| 1 | 200 | R_0603 | R3 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 470 | R_0603 | R9, R10, R11, R14, R15 |
| 1 | 220K/1% | R_0603 | R12 |
| 1 | 100K/1% | R_0603 | R13 |
| 1 | 100 | R_0603 | R18 |
| 1 | 2K | R_0603 | R20 |
Esp8266-hw design files
The KiCad project lives in the tridung141196/esp8266-hw repository on GitHub; these links point at the commit this page was built from.
Esp8266-hw: common questions
What microcontroller does the Esp8266-hw use?
The Esp8266-hw is built around the chip-esp8266, from the ESP8266 family.
How big is the Esp8266-hw PCB?
The Esp8266-hw measures 47.2 × 25.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp8266-hw?
48 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp8266-hw design files?
From the tridung141196/esp8266-hw repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Esp8266-hw design in my own project?
The repository has no license, so all rights stay with tridung141196. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp8266-hw without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398