Drivers
About the Drivers PCB
Drivers is an open source PCB design by try-except, published on GitHub. It is a 4-layer board measuring 53.6 × 60 mm, with 30 components from 17 distinct parts.
Other key parts include the DRV8411PWPR and DRV8871DDA. By type, the board carries 10 resistors, 8 capacitors, 4 ICs and 1 connector.
It belongs with the robotics & motion designs in this gallery.
Main components on the Drivers
Drivers bill of materials (BOM)
30 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | DRV8411PWPR Texas Instruments | HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.66x2.46mm | IC1, IC2, IC3 |
| 1 | DRV8871DDA Texas Instruments | VREG_LM5017MR_NOPB | U1 |
| 1 | TB0012-508-02GR DC_OUT Same Sky (Formerly CUI Devices) | TerminalBlock_MetzConnect_Type094_RT03502HBLU_1x02_P5.00mm_Horizontal | J3 |
| 1 | DC_CTRL | PinHeader_1x02_P2.54mm_Vertical | DC_IN1 |
| 1 | STP1_CTRL Sullins Connector Solutions | PinHeader_1x06_P2.54mm_Vertical | STP1 |
| 1 | STP1_OUT | PinHeader_1x04_P2.54mm_Vertical | STP1_OUT1 |
| 1 | STP2_CTRL Sullins Connector Solutions | PinHeader_1x06_P2.54mm_Vertical | STP2 |
| 1 | STP2_OUT | PinHeader_1x04_P2.54mm_Vertical | STP2_OUT1 |
| 1 | STP3_CTRL Sullins Connector Solutions | PinHeader_1x06_P2.54mm_Vertical | STP3 |
| 1 | STP3_OUT | PinHeader_1x04_P2.54mm_Vertical | STP3_OUT1 |
| 4 | GRM155R71H104KE14D 0.1uF MuRata | C_0402_1005Metric | C1, C2, C7, C8 |
| 1 | FVH035ADA470M0654 47uF FOSAN | CP_Elec_6.3x5.4 | C3 |
| 2 | C3216X7R1C106KT000N 10uF TDK | C_1206_3216Metric | C4, C5 |
| 1 | GRT188R61H105ME13D 1uF MuRata | C_0603_1608Metric | C6 |
| 1 | 0805W8F3002T5E 30k Stackpole Electronics Inc | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 6 | MFCR1206FR100QHR 100m RESI | R_1206_3216Metric | R2, R3, R5, R6, R8, R9 |
| 3 | 0805W8F1001T5E 1k Stackpole Electronics Inc | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R7, R10 |
Drivers design files
The KiCad project lives in the try-except/TitoSync repository on GitHub; these links point at the commit this page was built from.
Drivers: common questions
How big is the Drivers PCB?
The Drivers measures 53.6 × 60 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Drivers?
30 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Drivers design files?
From the try-except/TitoSync repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Drivers design in my own project?
The repository has no license, so all rights stay with try-except. Use it as a reference, and ask the author before reusing the design.
More boards in TitoSync
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Mesabob
rene-dev
87.5 × 50 mm44 parts2LGPL-3.0979
Bob
100 × 100 mm140 parts2LGPL-3.0979
Triple adapter
57 × 75 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979