Pico2Probe

TTF-fog·Pico2Probe·PCB/design_files/Pico2Probe.kicad_pcb

Pico2Probe PCB layout, top view — open source Raspberry Pi board by TTF-fog

About the Pico2Probe PCB

Pico2Probe is an open source Raspberry Pi PCB design by TTF-fog, published on GitHub. It is a 2-layer board measuring 18.5 × 34.9 mm, with 56 components from 26 distinct parts.

Its main chip is the RP2354A, from the Raspberry Pi family. Other key parts include the SSP7903P33PR and 74AUP1T17GWH. By type, the board carries 20 resistors, 19 capacitors, 8 diodes, 4 ICs, 3 connectors and 1 crystal.

From the project

An updated version of the original debugprobe with the following changes - - Based on the RP2354A - USB-C (i just really hate micro-b) - a configurable addressable RGB led

An updated version of the original debugprobe with the following changes - - Based on the RP2354A - USB-C (i just really hate micro-b) - a configurable addressable RGB led

1. Does one need to justify the act of creation? (or, in other words, why not?) (please do not take that out of context) 2. I had no way of debugging except plain UART (which is annoying), so i wanted something that would let me use an actual debugger 3. Wanted to make something using the RP2354A

Pico2Probe, from the project README
From the project README

Main components on the Pico2Probe

Pico2Probe bill of materials (BOM)

56 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2354A
U1
1
SSP7903P33PR
Siproin(上海矽朋)
U2
2
74AUP1T17GWH
Nexperia(安世)
U4, U5
1
CRYSTAL_GND24
Crystal_GND24
Y1
1
USB_C_RECEPTACLE_USB2.0_14P
USB_C_Receptacle_USB2.0_14P
J1
2
CONN_01X03_SOCKET
Conn_01x03_Socket
J2, J3
1
SK6812MINI
D2
1
C598352
RX
D3
1
C598352
TX
D4
1
TX1
TX
D5
1
RX1
RX
D6
1
BTR04A5-TP
TECH PUBLIC(台舟)
D7
2
ESD321DPYR
ESD321DPYR_C2868952
TI(德州仪器)
D10, D11
1
AOTA-B201610S3R3-101-T
ABRACON
L2
2
10UF
10uF
C1, C2
2
15PF
15pF
C3, C4
9
100NF
100nF
C5, C11, C12, C13, C14, C15, C16, C17 +1
4
4.7UF
4.7uF
C6, C8, C9, C10
1
100NFF
100nF
C7
1
1UF
1uF
C20
Show 6 more
QtyPartRefs
2
5.1K
R1, R2
8
1K
R3, R7, R8, R11, R12, R13, R14, R19
2
27
R4, R5
1
33
R6
6
100
R9, R10, R15, R16, R17, R18
1
10K
R20

Pico2Probe design files

The KiCad project lives in the TTF-fog/Pico2Probe repository on GitHub; these links point at the commit this page was built from.

Pico2Probe: common questions

What microcontroller does the Pico2Probe use?

The Pico2Probe is built around the RP2354A, from the Raspberry Pi family.

How big is the Pico2Probe PCB?

The Pico2Probe measures 18.5 × 34.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pico2Probe?

56 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pico2Probe design files?

From the TTF-fog/Pico2Probe repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Pico2Probe design in my own project?

The repository has no license, so all rights stay with TTF-fog. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pico2Probe without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards