2 open source boards using the SSP7903P33PR

Real designs built with the SSP7903P33PR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The SSP7903P33PR in open source designs

The gallery holds 2 open source boards using the SSP7903P33PR from 2 GitHub repositories; a typical one measures about 25.7 × 21.5 mm and carries around 32 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Pico2Probe by TTF-fog.

Microcontrollers on boards using the SSP7903P33PR

SSP7903P33PR: common questions

Where can I find a SSP7903P33PR reference design?

Each of the 2 boards on this page is a real design using the SSP7903P33PR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SSP7903P33PR use?

Most are built on Raspberry Pi (1).

How big is a typical board using the SSP7903P33PR?

The median is 25.7 × 21.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the SSP7903P33PR?

By GitHub stars, Pico2Probe by TTF-fog, with 0 stars.

Can I simulate one of these boards using the SSP7903P33PR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part