Main board

tuankiet65·pnc-modules·schematic/main_board/main_board.kicad_pcb

Main board layout, top view — open source STM32 board by tuankiet65

About the Main board

Main board is an open source STM32 PCB design by tuankiet65, published on GitHub. It is a 2-layer board measuring 100.3 × 67.3 mm, with 80 components from 41 distinct parts.

Its main chip is the STM32F405RGTx, from the STM32 family. Other key parts include the LD1117S33CTR and LD1117S50CTR. By type, the board carries 30 capacitors, 19 resistors, 16 connectors, 7 diodes, 3 ICs and 3 switches.

Main components on the Main board

Main board bill of materials (BOM)

80 components, 41 distinct parts.

QtyPartRefs
1
STM32F405RGTx
U1
1
LD1117S33CTR
U2
1
LD1117S50CTR
U3
1
12MHz
Y1
1
UART_1
J1
1
UART_2
J2
1
UART_3
J3
1
UART_4
J4
1
DIGITAL_1
J5
1
DIGITAL_2
J6
1
DIGITAL_3
J7
1
DIGITAL_4
J8
1
I2C_1
J9
1
I2C_2
J10
1
I2C_3
J11
1
I2C_4
J12
1
USB_OTG
J13
1
ANALOG
J14
1
SWD
J15
1
Barrel_Jack
J17
Show 21 more
QtyPartRefs
1
BOOT0
SW1
1
USR
SW2
1
RST
SW3
1
RED
D1
3
GREEN
D2, D5, D6
1
BLUE
D3
1
WHITE
D4
1
SS34
D7
1
600
L1
16
100n
C1, C2, C16, C18, C19, C20, C21, C22 +8
2
2.2u
C3, C12
2
10u
C4, C5
6
100n
C6, C7, C8, C10, C15, C17
1
10u
C9
1
1u
C11
2
5.6p
C13, C14
5
220
R1, R2, R3, R4, R5
2
560
R6, R9
2
22
R7, R8
9
10k
R10, R11, R13, R14, R15, R16, R17, R18 +1
1
2k2
R12

Main board design files

The KiCad project lives in the tuankiet65/pnc-modules repository on GitHub; these links point at the commit this page was built from.

Main board: common questions

What microcontroller does the Main board use?

The Main board is built around the STM32F405RGTx, from the STM32 family.

How big is the Main board?

The Main board measures 100.3 × 67.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Main board?

80 components, from 41 distinct parts. The full bill of materials is listed on this page.

Where can I download the Main board design files?

From the tuankiet65/pnc-modules repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Main board design in my own project?

The repository has no license, so all rights stay with tuankiet65. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Main board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in pnc-modules

Similar boards