6 open source boards using the LD1117S50CTR
Real designs built with the LD1117S50CTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
GuitarPedalSTM32
GuitarML
60 × 95 mm101 parts4LMIT98STM32
Teresina-Rack
marcoallegretti
68 × 40 mm209 parts12LNo license0STM32
Main board
tuankiet65
100.3 × 67.3 mm80 parts2LNo license0AVR/Arduino
Arduino mega design
ISLOWIsmaeli
101.6 × 53.3 mm73 parts2LNo license0ESP8266
Projeto poplock
fabriciorit
95.3 × 53.3 mm62 parts2LMIT0AVR/Arduino
Kontroler
domenipavec
147 × 78 mm38 parts2LNo license0
How designs wire the LD1117S50CTR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LD1117S50CTR connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a capacitor to GND on 4 of 6 designs, most often 100 nF (then 10 µF).
- The VOUT__1 pin is left unconnected on 3 of 4 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VOpin 2 | Connected to: 5V 83% · a signal 17% | — |
| VIpin 3 | Connected to: Signal 67% · 9V 33% |
|
| VOUT__1pin 4 | Connected to: Not connected 75% · 5V 25% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GuitarPedalSTM32 by GuitarML, Kontroler by domenipavec, Projeto poplock by fabriciorit and Arduino mega design by ISLOWIsmaeli.
The LD1117S50CTR in open source designs
The gallery holds 6 open source boards using the LD1117S50CTR from 6 GitHub repositories; a typical one measures about 97.8 × 60.3 mm and carries around 77 components.
67% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is GuitarPedalSTM32 by GuitarML.
Parts used alongside the LD1117S50CTR
Microcontrollers on boards using the LD1117S50CTR
What boards using the LD1117S50CTR are built for
LD1117S50CTR: common questions
Where can I find a LD1117S50CTR reference design?
Each of the 6 boards on this page is a real design using the LD1117S50CTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LD1117S50CTR VI pin connected?
The VI pin has a capacitor to GND on 4 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the LD1117S50CTR.
How is the LD1117S50CTR VOUT__1 pin connected?
The VOUT__1 pin is left unconnected on 3 of 4 designs. Counted from the KiCad layouts of 6 open source designs using the LD1117S50CTR.
Which microcontrollers do boards using the LD1117S50CTR use?
Most are built on STM32 (3), AVR/Arduino (2) and ESP8266 (1).
How big is a typical board using the LD1117S50CTR?
The median is 97.8 × 60.3 mm, and 67% are two-layer designs.
What is the most popular open source board using the LD1117S50CTR?
By GitHub stars, GuitarPedalSTM32 by GuitarML, with 98 stars.
Can I simulate one of these boards using the LD1117S50CTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.