Esp8266
tuankiet65·pnc-modules·schematic/esp8266/esp8266.kicad_pcb
About the Esp8266 PCB
Esp8266 is an open source ESP8266 PCB design by tuankiet65, published on GitHub. It is a 2-layer board measuring 36.8 × 41.3 mm, with 14 components from 10 distinct parts.
Its main chip is the ESP-12E, from the ESP8266 family. Other key parts include the LD1117S33CTR. By type, the board carries 5 resistors, 3 connectors, 2 ICs, 2 switches and 2 capacitors.
Main components on the Esp8266
Esp8266 bill of materials (BOM)
14 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP-12E | ESP-12E_SMD | U1 |
| 1 | LD1117S33CTR | SOT-223 | U2 |
| 1 | CONNECTOR | JST_XH_S04B-XH-A_04x2.50mm_Angled | J1 |
| 1 | ROW_1 | Pin_Header_Straight_1x09_Pitch2.54mm | J3 |
| 1 | ROW_2 | Pin_Header_Straight_1x08_Pitch2.54mm | J4 |
| 1 | RST | SW_PUSH_6mm | SW1 |
| 1 | FLASH_PROG | SW_PUSH_6mm | SW2 |
| 1 | 100n | C_1206_HandSoldering | C1 |
| 1 | 10u | C_1206_HandSoldering | C2 |
| 5 | 10k | R_1206_HandSoldering | R1, R2, R3, R4, R5 |
Esp8266 design files
The KiCad project lives in the tuankiet65/pnc-modules repository on GitHub; these links point at the commit this page was built from.
Esp8266: common questions
What microcontroller does the Esp8266 use?
The Esp8266 is built around the ESP-12E, from the ESP8266 family.
How big is the Esp8266 PCB?
The Esp8266 measures 36.8 × 41.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp8266?
14 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp8266 design files?
From the tuankiet65/pnc-modules repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Esp8266 design in my own project?
The repository has no license, so all rights stay with tuankiet65. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp8266 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in pnc-modules
STM32
Main board
tuankiet65
100.3 × 67.3 mm80 parts2LNo license0Main board plugged
tuankiet65
100.3 × 100.3 mm38 parts2LNo license0Relay 2x
tuankiet65
74.9 × 44.5 mm17 parts2LNo license0Ir transceiver
tuankiet65
40.6 × 15.9 mm8 parts2LNo license0Rtc ds1307
tuankiet65
50.8 × 26.7 mm6 parts2LNo license0Servo
tuankiet65
41.3 × 25.4 mm5 parts2LNo license0Power comsumption acs712
tuankiet65
51.4 × 16.5 mm5 parts2LNo license0Breakout digital
tuankiet65
36.2 × 16.5 mm4 parts2LNo license0Pir sensor
tuankiet65
50.2 × 34.9 mm3 parts2LNo license0Ultrasound sensor
tuankiet65
59.1 × 44.5 mm3 parts2LNo license0Dht11
tuankiet65
44.5 × 16.5 mm3 parts2LNo license0
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398